Rule Configuration Screen (Rule Details) - Verilink WANsuite 5330 Reference Manual

The Service Aware screen provides the user-activated buttons described in the
table below.
Button
Rule Details
Traffic Meter Stats
Clear Alarms
Refresh

Rule Configuration Screen (Rule Details)

Use the Rule Config screen (Figure 3.27) to establish Service Aware
parameters. To establish a rule, you must select the desired rule configuration
options and provide the appropriate filter information where required. Then
press the "Submit" button at the bottom of the screen.
Figure 3.27
The paragraphs below describe the rule configuration parameters and their
options:
Service Selects the service to which the rule applies from a pull-down list of
applicable DLCIs.
NOTICE:
DLCI Selects the DLCI to which the rule applies. Select from a pull-down list of
applicable DLCIs.
Filter By DLCI Enables or disables filtering of the IP traffic by the DLCI specified in the
DLCI pull-down list.
Function
Displays the Rule Configuration screen.
Displays the Traffic Meter Statistics screen.
Clears all Service Aware alarms.
Refreshes data on the current page.
Rule Config Screen
If you change the Service parameter, you must click on "Submit" to see
the appropriate DLCIs.
W e b S e r v e r I n t e r f a c e 3-37