Table of Contents
Advertisement
Applications
Endpoint Table Screen
3-28
W A N s u i t e 5 3 3 0
The Applications screens describe configuration tables and statistics for
Layer 3 and above that do not map to a specific service or interface.
The Endpoint Table (Figure 3.21) describes all endpoints terminating in the
unit; user-activated buttons are provided to view the Endpoint Details,
Endpoint Service Details, and Endpoint DLCI Details screens. The unit will
automatically learn all DLCIs from the network side and relay that
information on the serial side with default values.
NOTICE:
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database only after at least one endpoint parameter has
been changed and submitted in the Endpoint Details screen (page 3-28).
NOTICE:
Endpoint names of the form PPP-Sn are reserved by the system. These
system-generated endpoints cannot be modified.
Figure 3.21
Endpoint Table Screen
For most applications, you will not have to modify the Endpoint Table and
DLCI Table. Modification is necessary, however, to configure remote in-band
management (see In Band management on page 3-32).
Endpoint Details Screen
The Endpoint Details screen (Figure 3.22) gives you access to the
configuration parameters described in the following paragraphs.
Advertisement
Table of Contents
