Table of Contents
Advertisement
IP Service Details Screen
Applications
Endpoint Table Screen
4-26
W A N s u i t e 5 3 3 0
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and press the "Esc" key.
The IP Service Details screen (Figure 4.9), accessed by selecting "IP" from the
<Type> column in the IP Service screen, lets you configure the IP parameters
described on page 4-12.
To change any of the available parameters, you must enter new values in the
appropriate field(s) and press the "Esc" key to save your changes.
NOTICE:
To use newly established IP parameters, you must "Save and Restart."
(See "Save and Restart" on page 4-6.)
The Applications screens describe configuration tables and statistics for
Layer 3 and above that do not map to a specific service or interface.
The Endpoint Table (Figure 4.19) describes all endpoints terminating in the
unit; user-selectable prompts are provided to view the Endpoint Details,
Endpoint Service Details, and DLCI Details screens. The unit will
automatically learn all DLCIs from the network side and relay that
information on the serial side with default values.
NOTICE:
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database only after at least one endpoint parameter has
been changed and submitted in the "Endpoint Details Screen" on
page 4-27.
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database either when you perform a "Save and Restart" or
automatically every 15 minutes.
Advertisement
Table of Contents
