Network Interface Pin Assignments - Verilink WANsuite 5330 Reference Manual

Network Interface Pin Assignments

The physical interface is a standard RJ-48C, 8 -pin modular jack. The
NET
table below displays the pinout assignments.
DDS Network
Pin Interface
1 Data Out
2 Data Out
3 Not used
4 Not used
5 Not used
6 Not used
7 Data In
8 Data In
Supervisory Port Pin Assignments
The
SUPERVISORY PORT
The table below displays the pinout assignments.
Pin DCE Mode
1 DCD out
2 Rx Data out
3 Tx Data in
4 DTR in
5 Signal Ground
6 DSR out
7 RTS in
8 CTS out
9 No connect
interface is a standard DB-9, 9-pin modular jack.
DTE Mode
LL out
Tx Data out
Rx Data in
DSR in
Signal Ground
DTR out
CTS in
RTS out
No connect
S p e c i f i c a t i o n s A-7