Table of Contents
Advertisement
Receiving FECN/
BECN
CIR Threshold
CIR Alarm
Bits Over Be Threshold
Bits Over Be Alarm
Congestion Threshold
Congestion Alarm
BECN within CIR
Alarm
UAS Threshold
UAS Alarm
4-32
W A N s u i t e 5 3 3 0
When a frame is received with congestion bit set, this parameter is set to
"Yes." It is set back to "No" when a frame is received without congestion bit
set.
Values: Yes, No
Default: No
Sets the Tx over CIR alarm threshold. This threshold is the number of bits per
second in excess of CIR during a 15-minute interval. Setting this field to "0"
(zero) disables the alarm.
Reports if the Tx over CIR threshold has been exceeded.
Sets the Tx over Be alarm threshold. This threshold is the number of bits per
second in excess of CIR + Be during a 15-minute interval. Setting this field to
"0" (zero) disables the alarm.
Reports if the Tx over Be threshold has been exceeded.
Sets the Rx Congestion alarm threshold. This threshold is the number of
frames received with BECN/FECN. Setting this field to "0" (zero) disables
the alarm.
Reports if the Rx Congestion threshold has been exceeded.
Reports if Backward Explicit Congestion Notification (BECN) has been
received within CIR.
Sets the Unavailable Seconds (UAS) alarm threshold. This threshold is the
number of seconds after which the DLCI is unavailable. Setting this field to
"0" (zero) disables the alarm.
Reports if the UAS threshold has been exceeded.
DLCI Statistics Screen
The DLCI Details screen provides a "DLCI Statistics" prompt that displays a
table of the statistics for this DLCI as shown in Figure 4.22.
Advertisement
Table of Contents
