Status And Alarms Table - Verilink WANsuite 5330 Reference Manual

Table of Contents

Advertisement

Round Trip Delay Rate
Active
LMI Type
FrameStart Status
Rx Invalid Threshold
Rx Invalid Alarm
Tx Threshold
Tx Alarm
Rx Threshold
Rx Alarm
Specifies the rate (in seconds) at which Round Trip Delay packets are sent.

Status and Alarms Table

The table displayed at the bottom of the Frame Relay Service Details screen
reports on the status and condition of LMI parameters and on Receive/
Transmit alarms and thresholds. Alarm threshold levels may be changed by
entering a new threshold value in the appropriate field of the table and
clicking the "Submit" button. Table fields are described below.
Read-only field shows whether or not (Yes or No) an alarm is active.
Read-only status indicates ANSI, CCITT, LMI rev. 1, or Unknown.
Read-only status indicates Sourcing, Monitoring, or 0.
Number of invalid frames received during a 15-minute interval after which an
invalid alarm will be triggered. Default of "0" disables this alarm.
Status of this alarm indicates OK or Alarmed.
Number of bits per second sent during a 15-minute interval after which a Tx
alarm will be triggered. Default of 0 disables this alarm.
Status of this alarm indicates OK or Alarmed.
Number of bits per second sent during a 15-minute interval after which an Rx
alarm will be triggered. Default of 0 disables this alarm.
Status of this alarm indicates OK or Alarmed.
The Frame Relay Service Details screen provides the following user-activated
buttons:
Button
Function
Submit
Sets any values that have been changed.
Frame Relay Statistics Opens the Frame Relay Statistics screen for the current Frame
Relay service.
DLCI Table
Opens the DLCI Table screen, which displays all the DLCIs
on the current service. Refer to DLCI Table Screen on
page 3-35 for more information.
Clear Alarms
Clears all Frame Relay alarms.
Refresh
Refreshes data on the current page.
NOTICE:
When a "Submit" is executed, the Frame Relay link will be re-
initialized with the new parameters, causing a brief interruption in data
transfer.
W e b S e r v e r I n t e r f a c e
3-19

Advertisement

Table of Contents
loading

Table of Contents