Table of Contents
Advertisement
Web Server Access
Layout of Interface Screens
W
C
3
HAPTER
The WANsuite 5330 has an innovative, embedded Web-based user interface
(WANsight) for remote configuration and real-time reporting via Microsoft
Internet Explorer 5.0 or higher. Access to the Web server interface and how
the interface is used to configure the WANsuite 5330 unit are described in
detail below.
NOTICE:
Verilink recommends the use of Microsoft's Internet Explorer 5.0 or
higher because if you use other Internet browsers to access the Web
server interface, some screen elements will not display as described in
this manual.
Configuration through the VT100 interface is covered in Chapter 4.
You can access the Web Server interface through any IP connection to the
WANsuite 5330. This connection can be directly through the 10/100 Ethernet
port, PPP over the Serial or Supervisory port, or in-band via encapsulated IP
traffic on the Frame Relay circuit.
NOTICE:
Any changes to the unit's configuration MUST be followed by a
"Submit" (if there is a "Submit" key on the menu) and a "Save
and Restart."
To access the Web server interface, type the unit's IP address in the browser's
Address (or Location) field and press the "Enter" key.
When you first access the Web server interface, your browser will display a
screen that is divided into three frames. The upper frame forms a border
across the top of the screen; it identifies the Verilink unit in service and
S
EB
ERVER
C
H A P T E R
3
I
NTERFACE
W e b S e r v e r I n t e r f a c e
3-1
Advertisement
Table of Contents
