Table of Contents
Advertisement
Interfaces
Network Screen
Mode
Timing
Figure 3.3
Save and Restart Confirmation Screen
The WANsuite 5330 has the following interfaces: Network, Serial, 10/100
Ethernet, and Supervisory. Each of the interfaces and their associated screens/
menus are described below.
The Network screen (Figure 3.4) lets you view and make changes to the
Network interface's configuration as described below. In addition, this screen
provides a table that displays the current status and alarm values for the
Network interface.
Figure 3.4
Network Screen
Selects the network service type.
Values
DDS I 56K, DDS II CC-64K
Default: DDS I 56K
Sets the timing source to synchronize the unit's internal timing generators.
Choices are as follows:
Internal – The unit's internal frequency standard is used for all timing.
W e b S e r v e r I n t e r f a c e
3-5
Advertisement
Table of Contents
