Setup On Compex Sgx3226 For Broadband Internet Access - Compex SGX3226 User Manual

Chapter 6 Configuring Your Wide Area Network
6.2

Setup on Compex SGX3226 for Broadband Internet Access

For such service, you should have the IP address info ready that is provided by your ISP before
proceeding.
1. Connect a crossover cable from the Ethernet port of Compex SGX3226 to your workstation.
SGX3226
Figure 6.2-1
2. Connect an Ethernet cable from Ethernet port of SGX3226 to the ADSL/Cable modem.
As there are many different brands of broadband modems. Some broadband modems may
provide a straight-connect (MDI) Ethernet cable while some may use cross-connect (MDIX)
Ethernet cable.
For example:
Aztech Turbo 900 provides cross-connect (MDIX) cable while Alcatel 1000 ADSL model
provides straight-connect (MDI) cable.
3. Power on the broadband modem and wait for broadband modem to complete the initialization
process that may takes about 1 minute or more, depending on the brand and design of
individual modems.
4. Next, power on both your workstation and Compex SGX3226. The LNK/ACT LED should
light up, indicating the connection has established.
5. You may start to configure Compex SGX3226 before connecting to the Internet. Please refer
to "Configuration of Compex SGX3226 using Web-based Interface" on Page 25.
6. Once everything is checked, you can now access to the Internet.
45
Cable/ADSL Modem
Connection between Compex SGX3226 and modem
Internet
Workstation