Table of Contents
Advertisement
Chapter 5
Using Menu Tools
Chapter 5
Using Menu Tools
This chapter explains the configuration menu tool that comes with Compex SGX3226 when you use the
web-based configuration interface. Here, we will briefly discuss each Menu components and its function.
5.1
Using CONFIGURATION menu
5.1.1
Port Config
This function allows you to have an easy access to the network via the ports of Compex
SGX3226. Notice that the "Link state" option indicates 'Up'. This shows that the port is
connected to the network. It can either be in "Up" (Connected) or 'Down' (No
connection) state.
Broadcast Rate Limit
This function sets broadcast limit to the desired rate
for the specified port. It controls the reception of
broadcasting packets. The ranging for Broadcast rate
limit varies from 0% to 100%. The higher the rate is,
the more data can pass through the traffic. Rate is the
percent of the traffic to allow before throttling.
Port Priority
To specify the VLAN priority to expedite the VLAN
traffic.
Port VLAN ID
VLAN ID is the sequence number of a VLAN.
Compex SGX3226 has 32 VLANs to specify and
therefore the VLAN ID is from 1 to 32.
Port State
Enabling this function allows the chosen port to
receive and forward the packets, and learns the
respective source MAC Addresses.
29
Flow Control
This feature reports the Flow
Control setting of the port.
Enabling the Flow Control
function allows Half and Full
Duplex mode.
Figure 5.1-1
Configuration for Individual Port
Advertisement
Table of Contents
