Table of Contents
Advertisement
Chapter 6
Configuring Your Wide Area Network
6.2
Setup on Compex SGX3226 for Broadband Internet Access
For such service, you should have the IP address info ready that is provided by your
ISP before proceeding.
Cable/ADSL
Figure 6.1
1.
Connect a crossover cable from the Ethernet port of Compex SGX3226 to your
workstation.
2.
Connect an Ethernet cable from Ethernet port of SGX3226 to the ADSL/Cable
modem.
3.
Power on the broadband modem and wait for broadband modem to complete the
initialization process.
4.
Next, power on both your workstation and Compex SGX3226. The LNK/ACT
LED should light up, indicating the connection has established.
5.
You may start to configure Compex SGX3226 before connecting to the Internet.
Please refer to Chapter 5 "Web-based Interface Configuration for Compex
SGX3226" on Page 19.
6.
Once everything is checked, you can now access to the Internet.
Compex SGX3226
Modem
Connection between Compex SGX3226 and modem
PC
35
Advertisement
Table of Contents
