Mirrorport Config - Compex SGX3226 User Manual

Managed switch series 24+2 gigabit snmp switch with integrated router

Hide thumbs Also See for SGX3226:

Table of Contents

Chapter 7

Advanced Configuration for Compex SGX3226

7.5

MirrorPort Config

7.5.1

Using Mirror Port to monitor Traffic

This function allows you to set up a 'mirror' port of any specified port/s or VLAN, such

that you can monitor the traffics of the monitored port/s or VLAN without intervening

them. In effect, the traffics on the monitored port/s or VLAN are replicated on the

mirror port that you can use a protocol analyzer to analyze the traffic for specific

problem.

Figure 7.5-1

1. Select one Mirror Port.

2. Click on the dashed line '–' on that particular port if you want to select it as a

Mirrored Member (T).

3. Hit on "Apply" button after you are satisfied with the setup. Click "Save" button to

update the latest configuration.

Setting of Mirrored Member for Mirror Port

Table of Contents