Configuring Dynamic Ip Connection - Compex SGX3226 User Manual

Chapter 6 Configuring Your Wide Area Network
6.4

Configuring Dynamic IP Connection

Compex SGX3226 is pre-configured with WAN connection using Dynamic IP. Hence, if you are
using Cable Internet, you do not need to configure the WAN connection.
However, if your account requires a DHCP Client ID in order to released an IP address, you may
need to configure the name of Compex SGX3226 with the DHCP Client ID issued by your ISP.
See the section on "System Configuration" on Page 65, and remember to enter the DHCP Client
ID issued by the ISP into the System Name field in the System Identity.
NOTE
If your computer is not able to resolve any web site, please verify that your DNS
entry of the computer has been defined correctly.
6.4.1 How to configure Singapore Cable Vision (SCV) Service
SCV provides Dynamic IP address connection service. Assume that your SGX3226 is
not in the Dynamic IP setting, please follow these procedures to change to the
appropriate WAN type.
1. Go to WAN Config. Click on the pull-down menu from the WAN Port field.
2. On the list of other WAN types selection, select Dynamic IP Address and hit on
the "Save" button.
Figure 6.4-1
47
Dynamic IP Address –for SCV broadband provider