Chapter 10
Application on Virtual LAN
10.4
Working Examples on Tagged VLAN using Web-based Interface
The setting up of Tagged Virtual LAN will be discussed in this section using Web-based
Interface. You may follow the procedures stated below:
10.4.1
Hardware Setup for Networking
Two tagged VLANs - VLAN C and VLAN D are created in the physical network.
VLAN C consists of Server 1, Control Unit, Workstation 1 and 2. VLAN D consists of
Server 2, Workstation 3 and 4. The connection with port 25 of Switch 1 and port 25 of
Switch 2 transfer data for both VLAN C and D simultaneously and separately.
VLAN C
For Switch 1,
Connect Server 1 and Control Unit to Port 1 and 3 respectively.
For Switch 2,
Connect Workstation 1 and 2 to Port 7 and 8 respectively.
VLAN D
For Switch 1,
Connect Server 2, Workstation 3 to Port 14 and 13 respectively.
For Switch 2,
Connect Workstation 4 to Port 19.
For uplink purpose, you can make use of the Gigabit ports to connect Port 25 of Switch
1 to Port 25 of Switch 2.
87