Chapter 10
Application on Virtual LAN
10.2.2
Configuration for Switch 1
VLAN A
1. Open a browser and key in the IP address for Switch 1, such as 192.168.100.128.
2. Go to VLAN Config option and enabled the Status at Group 2.
3. Set VID number to 10. (Any number between 2 to 4094.)
4. Click on '-' to 'U' for Port 1 to 12 and 25. Notice that the picture illustrated on
Page 81 used only Port 1, 2,and 3, we still can allocate the remaining ports to
VLAN A for further usage.
VLAN B
5. Next, enabled the Status at Group 3. Set VID Number to 20.
6. Click on '-' to 'U' for Port 13 to 24 and 26. Also note that the picture illustrated on
Page 81 used only Port 16 and 18, we still can allocate the remaining ports to
VLAN B for further usage.
7. Click "Save" button upon confirmation.
Figure 10.2-1
83
Untagged VLAN setting for Switch 1