Table of Contents
Advertisement
Chapter 5
Using Menu Tools
IP Address
Three values are possible for this
field: Any, Range or Single. If you
have selected Any, you may leave the
next two fields blank. If you have
selected Range, enter the range of IP
addresses in (From) and (To) fields. If
you have selected Single, you only
need to enter the specific source IP
address in the (From) field
Day of the Week
Two values are possible for this field,
Any or Range. If you have selected
Any, you may leave the next two
fields blank. If you have selected
Range, enter the duration of the
weekdays in (From) and (To) fields.
Destination Port
Three values are possible for this field, Any, Range
or Single. If you have selected Any, you may leave
the next two fields blank. If you have selected Range,
enter the range of TCP port in (From) and (To)
fields. If you have selected Single, you only need to
enter the specific TCP port in the (From) field.
2. Enter the appropriate data in the respective entries for Rule Name, IP Address,
Destination Port, Day of the Week and Time of the Day.
3. Press the "Apply" button to add the new rule or "Cancel" button to discard the rule.
To save the rules, click the "Save" button.
To add new rules, click on "Add" button.
To delete a rule, select the rule on the Select to Edit column and click "Delete" button.
CAUTION
You must synchronize the clock of Compex SGX3226 to your PC's time for
the rules to execute accurately. Refer to "Set System Clock" on Page 64 to
utilize the timing based function of Compex SGX3226.
43
Figure 5.1-12
IP Filtering Configuration
Time of the Day
Two values are possible for
this field, Any or Range. If
you have selected Any, you
may leave the next two fields
blank. If you have selected
Range, enter the time in
(From) and (To) fields.
Advertisement
Table of Contents
