Chapter 3 Hardware Installation; Physical Setup For Compex Sxp2226Wm; Desktop Installation - Compex SXP2226WM User Manual

Chapter 3 Hardware Installation
Chapter 3 Hardware Installation
Compex SXP2226WM can be installed as a desktop unit or mounted on a 19-inch rack. There
are two types of installation for Compex SXP2226WM, one is to connect your PC directly to
the management port. Alternatively, you can configure by linking the management port to one
of the LAN ports and configure the switch through one of the ports. Detailed installation
process will be listed as shown below.
3.1

Physical Setup for Compex SXP2226WM

Method #1 – Directly connected to the Management Port
Compex SXP2226WM is ideal for office usage, which can either be installed on a flat
surface (desktop) or mounted on a 19-inch rack. The following steps illustrate a
proper installation of Compex SXP2226WM.
Figure 3.1a
3.1.1

Desktop installation

1.
2.
3.
4.
10
Physical Setup for Compex SXP2226WM
Unpack Compex SXP2226WM.
Place it near to a power outlet. Ensure that there is sufficient space for
heat ventilation.
The surface to place Compex SXP2226WM should be clean, smooth,
level and sturdy.
Ensure there is enough spacing around the unit to allow attachment of
network cables.