Package Contents; Features On Compex Sas2224 - Compex SAS2224 Quick Install Manual

2. Package Contents

♦ 1 x Compex SAS2224 Switch Unit
♦ 1 x Power Cord
♦ 1 x Accessory Set
♦ 1 x Quick Install Guide with warranty card

3. Features on Compex SAS2224

♦ 10/100 N-Way Auto-Negotiation or Forced Mode
By default, Compex SAS2224 is configured for auto-negotiation to the highest possible
operation mode between two nodes. Alternatively, the users are able to manually configure
the speed (10/100Mbps) and the transmission mode (full/half duplex) of the ports.
♦ 10/100 Mbps Switching Function
A cost-effective 100Mbps and 10Mbps switching function in a single unit. Compex SAS2224
divides the network into smaller shared groups, eliminating unnecessary traffic and relieving
congestion on server paths.
♦ 10/100 Mbps Integration
24 high-speed ports permit Ethernet workgroups to communicate with Fast Ethernet users in a
single integrated network, and share servers connected to the dedicated 100Mbps ports.
♦ Efficient and Reliable Packet Forwarding
The self-learning mechanism allows Compex SAS2224 to learn the MAC addresses related to
the individual port and map them onto a MAC Address table. The incoming packets are
forwarded only to the related port. Hence, this would reduce unnecessary broadcasts to the
network. With Half Duplex Back Pressure flow control and Full Duplex IEEE802.3x Flow
Control, Compex SAS2224 is able to ensure zero packets loss even when the switching buffer
is full.
2 24-port 10/100Mbps Fast Ethernet Switch
with Power Buttons
SAS2224
English