Configuration For Switch 2 - Compex SGX3226 User Manual

Chapter 10 Application on Virtual LAN
10.2.3

Configuration for Switch 2

VLAN A
1. It is recommended to open another browser and key in the IP address for Switch 2,
such as 192.168.100.141.
2. Go to VLAN Config option and enabled the Status at Group 2.
3. Set the VID number to 10. (Between 2 to 4094.)
Notice that the VID Number for Untagged VLAN A and VLAN B can be different.
4. Click on '-' to 'U' for Port 1 to 12 and 25. Notice that the picture illustrated on
Page 81 used only Port 7 and 8, we still can allocate the other ports to VLAN A for
further usage.
VLAN B
5. Enabled the Status at Group 3 and set the VID number to 20. (Any number
between 2 to 4094.) VID number for Untagged VLAN A and VLAN B may not be
the same from Switch 1 and 2.
6. Click on '-' to 'U' for Port 13 to 24 and 26. Also note that the picture illustrated on
Page 81 used only Port 24 and 21, we still can allocate the remaining ports to
VLAN B for further usage.
7. Click "Save" button to save all configurations.
84