Chapter 4
Software Installation
After logging in to the Management system, the Main Page will display as shown below. The
image of Compex SGX3226 is shown on the upper right window. The status of each switch port
(i.e. link, speed and duplex mode) can be seen clearly from the LED displays on the image. The
lower right window is used to display the web pages of versatile configuration and operations.
Configuration
Window
Command Menu
Window
Figure 4.4-2
Main Page of Compex SGX3226
The Main menu includes four sections in the Command Menu Window, namely
CONFIGURATION, ADVANCED, SYSTEM TOOLS and HELP. The overall descriptions
for individual sub-functions are listed as shown:
CONFIGURATION menu
♦ Port Configuration – configuration for communications via network
♦ VLAN Configuration – setup Virtual LAN, whether in tagged or untagged-based
♦ Trunking Configuration – Extend the limitation of bandwidth
♦ DHCP Configuration – setup, reserve or activate DHCP
♦ WAN Configuration – support Static, Dynamic and PPP over Ethernet services
♦ NAT Configuration – increase security for unauthorized access through WAN
27