Connecting Your Modem To Compex Sgx3226 - Compex SGX3226 User Manual

Chapter 3 Hardware Installation
3.2

Connecting Your modem to Compex SGX3226

Compex SGX3226 allows a maximum of up to two modems connections. Only use those
modems as specified in Section 2.2.3 Modem Requirements on Page 14.
With Compex SGX3226 and any of the four modems power off, connect one end of the modem
cable to any port of Compex SGX3226. The other end of the modem cable is to be connected to
your own ADSL/Cable modem. (Set up the modem for dial-up connection. You may need to
refer to your respective Modem's manual for installation.)
NOTE
Connect Compex SGX3226 using one modem first. Once you have established
an Internet connection, then add the additional modem as and when needed.
3.3 Connecting Your Compex SGX3226 to your Network
You can connect Compex SGX3226 via the RJ-45 port to an external Ethernet Hub/Switch to
increase the number of users for Internet access. Using a straight through UTP network cable,
connect one end to Compex SGX3226 and the other to the network Switch.
Once all physical connections are established, turn on the power to the modem, Compex
SGX3226, PC and the network Switch.
The figure shows on Page 18 an example how Compex SGX3226 can be connected to an existing
switch to increase the Internet access for the LAN users from just one dedicated Internet access to
multiple accesses.
17