Configuring Static Ip Connection - Compex SGX3226 User Manual

Managed switch series 24+2 gigabit snmp switch with integrated router

Hide thumbs Also See for SGX3226:

Table of Contents

Chapter 6

Configuring Your Wide Area Network

6.3

Configuring Static IP Connection

1. Go to WAN Config at Command Window, click on the pull-down menu from the WAN

Port field.

2. Next, select Static IP Address from the pull down menu at WAN Type field.

You may enter your IP Address, Subnet Mask and Gateway IP Address in the individual

fields. All these information can be obtained from your ISP/Network Administrator.

3. Click on "Save" button to update the data.

The WAN Setup screen shows a Static IP Configuration that allows you to configure your

Static IP connection to your ISP.

Figure 6.3-1

Select WAN Type - Static IP Address

Table of Contents