Configuring Ppp Over Ethernet Session (Pppoe) - Compex SGX3226 User Manual

Managed switch series 24+2 gigabit snmp switch with integrated router

Hide thumbs Also See for SGX3226:

Table of Contents

Chapter 6

Configuring Your Wide Area Network

6.5

Configuring PPP over Ethernet Session (PPPoE)

For Broadband service providers such as Pacific Internet Broadband and SingNet Broadband, you

have to select the PPPoE WAN configuration. This includes Germany who are using T-1

connection.

NOTE

Certain ADSL Internet subscriptions require Service Name to be specified in

order to establish a PPPoE connection.

6.5.1

How to Configure SingNet, PacNet &QALA DSL Broadband

This procedure assumed your ADSL modem and PC/notebook is working with the

logon account from SingNet, Pacific Internet or QALA DSL broadband service, and

necessary hardware connection has been established (refer to Section 6.2 on Page 45),

NOTE

If you have chosen self-installation when you register for the broadband

service, you should first test the ADSL modem together with the logon

account on your PC. Make sure it can connect successfully before attempting

to run it with Compex SGX3226

1. Go to WAN Config. Click on the pull-down menu from the WAN Port field.

2. Click on WAN Type option and select PPP over Ethernet.

3. Click "Save" button to update your configuration.

Now, you may activate the Internet Explorer and start surfing the net.

Table of Contents