Port Vlan Setup - Compex SGX3224 Quick Install Manual

Port VLAN Setup

1. Press the "Config VLAN" button on the left-hand-side of the screen.
Following screen on the bottom will come out:
2. You see the VLAN table of VLAN ID shown on the "VLAN ID" box.
3. You can select the corresponding VLAN table by clicking the down
pointing arrow at the "VLAN ID" box. Select the number from 1 to 16 and
then press the "Select" button; the corresponding port for this VLAN ID
will be shown.
4. In the VLAN table, there are total 25 check boxes – 1 check box for each
port. If there is a tick at the corresponding check box, it means that this
particular port belong to this VLAN group.
5. You can select or deselect any port by clicking the corresponding check box
by mouse – click the check box until a tick appear to select the port; or
click the check box until the tick disappear to deselect the port.
6. After you make the changes in one VLAN table, you have to press the
"Apply" button below to apply the change to that VLAN table.
7. You can now change another VLAN table by changing the "VLAN ID"
number and press the "Select" button.
14 Compex 24 - Port All 10/100 Management Switch
(SGX3224, SGX3224 PLUS)
English