Table of Contents
Advertisement
Chapter 8
Using SYSTEM TOOLS Menu
8.2
System Configuration
This is an easy access in configuring the system. You can configure IP address, Subnet Mask or
Default Gateway of the management board in Compex SGX3226. It is likely that several VLANs
are on the single switch, and each VLAN can be regarded as an independent network, so their
network addresses may be different.
1. Give a description for the System Name and System Location of Compex SGX3226.
2. Key in the System Contact information and describe the Product Name of the switch.
3. Enter the IP address and Subnet Mask.
4. Click "Apply" button and save the setting.
Upon making amendments on this page, the screen will appear a message, "Reboot the switch?".
Click on "Yes" button to take effect on the changes.
Click on "Logon" button again if you still need to access to Compex SGX3226 web page. This
cannot apply to the changing of IP Address!
CAUTION
After changing IP Address of Compex SGX3226, the system will not lead
you to log in to the web page after you have clicked "Logon" button.
Instead, a page error will display on the screen, stating "The page cannot
be displayed". Enter your NEW IP Address to login to the web page again.
65
Figure 8.2-1
Configuration for the system
Advertisement
Table of Contents
