Chapter 2 Getting Started - Compex SGX3226 User Manual

Chapter 2 Getting Started
Chapter 2 Getting Started
This chapter outlines the basic requirement needs before you begin any installation and configuration on
Compex SGX3226.
2.1 Packaging Content
Thank you for purchasing the Compex Managed Switch Series Compex SGX3226. You will find
the following items in the package:
♦ 1 x Compex SGX3226 unit
♦ 1 x Power Cord
♦ 2 x brackets
♦ 6 x screws
♦ 1 x RS232 crossover cable
♦ 4 x rubber feet
♦ 1 x Quick Install Guide with Warranty Card
♦ 1 x CD-ROM (Web browser, Acrobat Reader, User's Manual, FreedomView Pro SNMP
Manager Software, Npfind Utility Software)
2.2 Setup Considerations
Prepare checklist before you start:
♦ Check your Local Area Network configurations. Check if it is Dynamic or Static IP
addressing.
♦ Check the TCP/IP protocols and IP address settings of the PCs/Clients or Ethernet Switch in
your LAN.
♦ At least one dial-up account from Internet Service Provider (ISP).
♦ RJ45 telephone cable connected to the external modem.
2.2.1 Software Requirements
♦ Windows 95/98/2000/NT/ME
♦ Any other TCP/IP-enabled systems like Mac OS and UNIX
♦ Hyper Terminal Program
♦ Web Browser, such as Microsoft Internet Explorer (4.0 and above) or Netscape
Navigator (4.0 and above)
♦ FreedomView Pro SNMP Manager Software
♦ Npfind utility software
13