Table of Contents
Advertisement
KINO-CV-D25501/N26001 SBC
Main
Advanced
iEi Feature
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Auto Recovery Function
Recover from PXE
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 21: IEI Feature
Step 13:
Save changes and restart the system. If the system encounters a Blue Screen of
Death (BSoD) or a hang for around 10 minutes, it will automatically restore from
the factory default image.
B.4 Setup Procedure for Linux
The initial setup procedure for Linux system is mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.
Step 1:
Hardware and BIOS setup. Refer to Section B.2.1.
Step 2:
Install Linux operating system. Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.
NOTE:
If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3,
the Symantec Ghost may not function properly.
While installing Linux OS, please create two partitions:
BIOS SETUP UTILITY
PCIPNP
Boot
Security
[Enabled]
[Disabled]
Step 0:
Chipset
Exit
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1
General Help
F10
Save and Exit
ESC
Exit
Page 123
Advertisement
Table of Contents
