Intel pentium m/ celeron m mini-itx motherboard six serial ports, four usb ports, four ethernet ports, vga, lvds, pcie x16, sata and 24-bit digital i/o (232 pages)
Mini-itx sbc supports lga1155 for intel core i3/ pentium/celeron cpu, ddr3, vga/dvi-d/hdmi, dual pcie gbe, ten usb 2.0, four sata 3gb/s, hd audio and rohs (162 pages)
Mini-itx sbc with 3rd generation 22nm intel mobile cpu up to 8.0 gb ddr3, dvi, hdmi, lvds, dual gbe, usb 3.0, sata 6gb/s, pcle mini, pcle x16, intel amt, rohs (208 pages)
KINO-G45A Mini-ITX Motherboard IEI Technology Corp. MODEL: KINO-G45A Mini-ITX LGA775 Motherboard for Intel® Core™2 Duo/Quad/Extreme CPU, 800/1066/1333MHz FSB, VGA, DVI-D, HDMI, LAN, SATA, PCI, USB, HD Audio, RoHS Compliant User Manual Page i Rev. 1.01 – 12 August, 2010...
Page 2
KINO-G45A Mini-ITX Motherboard Revision Date Version Changes 12 August, 2010 1.01 Minor edit 10 July, 2009 1.00 Initial release Page ii...
Page 3
KINO-G45A Mini-ITX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 5
KINO-G45A Mini-ITX Motherboard 3.2.11 SPI Flash Connector ..................24 3.2.12 System Fan Connector ................... 25 3.2.13 USB Connectors..................... 26 3.3 E ......... 28 XTERNAL ERIPHERAL NTERFACE ONNECTOR ANEL 3.3.1 Audio Connector ....................28 3.3.2 DVI Connector ....................29 3.3.3 HDMI Connector ..................... 29 3.3.4 Keyboard/Mouse Connector ................
Page 6
KINO-G45A Mini-ITX Motherboard 5.1.1 Starting Setup....................56 5.1.2 Using Setup ...................... 56 5.1.3 Getting Help..................... 57 5.1.4 Unable to Reboot After Configuration Changes..........57 5.1.5 BIOS Menu Bar....................57 5.2 M ........................58 5.3 A ....................... 59 DVANCED 5.3.1 CPU Configuration..................60 5.3.2 IDE Configuration ...................
Page 7
KINO-G45A Mini-ITX Motherboard C.2 DIO C ..................107 ONNECTOR INOUTS C.3 A ................107 SSEMBLY ANGUAGE AMPLES C.3.1 Enable the DIO Input Function..............107 C.3.2 Enable the DIO Output Function ..............107 D WATCHDOG TIMER ....................108 E COMPATIBILITY .....................111 E.1 C...
Page 8
Figure 4-2: Remove Protective Cover..................38 Figure 4-3: CPU Socket Load Plate.....................38 Figure 4-4: Insert the Socket LGA775 CPU................39 Figure 4-5: Cooling Kits (CF-520 and CF-775A) ................40 Figure 4-6: Securing the Heat sink to the KINO-G45A..............41 Figure 4-7: DIMM Installation.......................42 Page viii...
Page 9
KINO-G45A Mini-ITX Motherboard Figure 4-8: AT/ATX Power Mode Jumper Location..............44 Figure 4-9: Clear BIOS Jumper Location ...................45 Figure 4-10: SATA Drive Cable Connection................45 Figure 4-11: SATA Power Drive Connection................46 Figure 4-12: Dual USB Cable Connection ..................47 Figure 4-13: Audio Connector .....................48 Figure 4-14: DVI Connector ......................49...
Page 11
KINO-G45A Mini-ITX Motherboard BIOS Menus BIOS Menu 1: Main ........................58 BIOS Menu 2: Advanced ......................60 BIOS Menu 3: CPU Configuration ....................60 BIOS Menu 4: IDE Configuration....................61 BIOS Menu 5: IDE Master and IDE Slave Configuration ............63 BIOS Menu 6: Super IO Configuration..................67 BIOS Menu 7: Hardware Health Configuration ................69...
1.1 Introduction Figure 1-1: KINO-G45A The KINO-G45A is a Mini-ITX motherboard. It accepts a Socket LGA775 Intel® Core™2 Duo/Quad/Extreme processor and supports two 667/800 MHz Dual-channel DDR2 DIMM modules up to 2.0 GB each. The KINO-G45A supports multiple video outputs including VGA, DVI-D, and HDMI ports.
Powerful graphics with multiple monitors Staying connected with both wired LAN connections Speedy running of multiple programs and applications 1.3 Features Some of the KINO-G45A motherboard features are listed below: Mini-ITX RoHS compliant LGA 775 CPU socket PCI card expansion slot...
KINO-G45A Mini-ITX Motherboard 1.5 Dimensions The main dimensions of the KINO-G45A are shown in the diagram below. Figure 1-3: KINO-G45A Dimensions (mm) Page 5...
KINO-G45A Mini-ITX Motherboard 1.6 Data Flow F igure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram Page 6...
Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the KINO-G45A is unpacked, please do the following: Follow the antistatic guidelines above. Make sure the packing box is facing upwards when opening.
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the KINO-G45A was purchased from or contact an IEI sales representative directly by sending an email to ales@iei.com.tw.
KINO-G45A Mini-ITX Motherboard Quantity Item and Part Number Image Quick Installation Guide Table 2-1: Packing List 2.4 Optional Items The KINO-G45A is shipped with the following components: Item and Part Number Image CPU cooler kit (P/N: CF-520-RS) CPU cooler kit (P/N: CF-775A-RS)
KINO-G45A Mini-ITX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 KINO-G45A Layout The figures below show all the connectors and jumpers. Figure 3-1: Connectors and Jumpers 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
KINO-G45A Mini-ITX Motherboard 3.2 Internal Peripheral Connectors The section describes all of the connectors on the KINO-G45A. 3.2.1 ATX Power Connector CN Label: ATX20 20-pin ATX (2x10) CN Type: CN Location: See Figure 3-2 CN Pinouts: See Table 3-3 The ATX power connector connects to an ATX power supply.
KINO-G45A Mini-ITX Motherboard Description Description PW-OK +VCC5SB +5 V +12 V +5 V Table 3-3: ATX Power Connector Pinouts 3.2.2 Battery Connector CN Label: BAT1 CN Type: 2-pin wafer (1x2) See Figure 3-3 CN Location: CN Pinouts: See Table 3-4 This is connected to the system battery.
KINO-G45A Mini-ITX Motherboard Description Battery+ Ground Table 3-4: Battery Connector Pinouts 3.2.3 CPU Fan Connector CN Label: CPU_FAN1 4-pin header CN Type: CN Location: See Figure 3-4 CN Pinouts: See Table 3-5 The fan connector attaches to a CPU cooling fan.
KINO-G45A Mini-ITX Motherboard 3.2.4 CPU Power Input Connector CN Label: CPU12V2 4-pin AT CN Type: CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The CPU power input connector provides power to the CPU. Figure 3-5: CPU Power Input Connector Location PIN NO.
KINO-G45A Mini-ITX Motherboard The digital I/O connector provides programmable input and output for external devices. The digital I/O provides 4-bit output and 4-bit input. Figure 3-6: Digital I/O Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION Output 3 Output 2...
KINO-G45A Mini-ITX Motherboard The front panel connector connects to the indicator LEDs and buttons on the computer's front panel. Figure 3-7: Front Panel Connector Location DESCRIPTION Power button+ Power button- HDD LED+ HDD LED- Power LED+ Power LED+ Power LED-...
KINO-G45A Mini-ITX Motherboard 3.2.9 SATA Drive Connectors CN Label: SATA1~6 7-pin SATA drive connectors CN Type: CN Location: See Figure 3-10 The SATA drive connectors can be connected to SATA drives. Figure 3-10: SATA Drive Connector Location 3.2.10 S/PDIF Connector...
KINO-G45A Mini-ITX Motherboard Figure 3-13: System Fan Connector Location PIN NO. DESCRIPTION +12 V Fan_Detect Table 3-11: System Fan Connector Pinouts 3.2.13 USB Connectors CN Label: USB45 CN Type: 8-pin header (2x4) CN Location: See Figure 3-14 See Table 3-12 CN Pinouts: The USB connectors connect to USB devices.
KINO-G45A Mini-ITX Motherboard 3.3.2 DVI Connector CN Label: VIDEO1 DVI connector CN Type: CN Location: See Figure 3-15 CN Pinouts: See Figure 3-17 and Table 3-13 The 24-pin Digital Visual Interface (DVI) connector connects to high-speed, high-resolution digital displays. The DVI-D connector only supports digital signals.
KINO-G45A Mini-ITX Motherboard PIN NO. DESCRIPTION PIN NO. DESCRIPTION Table 3-17: Serial Port Pinouts Figure 3-18: Serial Port Pinouts 3.3.7 USB Connector CN Label: USB_C23 CN Type: USB port CN Location: See Figure 3-15 CN Pinouts: See Table 3-18 The USB connector can be connected to a USB device.
KINO-G45A Mini-ITX Motherboard 3.3.8 VGA Connector CN Label: VIDEO1 15-pin Female CN Type: CN Location: See Figure 3-15 CN Pinouts: See Figure 3-19 and Table 3-19 The VGA connector connects to a monitor that accepts a standard VGA input. Figure 3-19: VGA Connector...
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the KINO-G45A. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the KINO-G45A or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Page 47
This helps to prevent potential ESD damage. Turn all power to the KINO-G45A off: When working with the KINO-G45A, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system.
KINO-G45A Mini-ITX Motherboard 4.2.1 Socket LGA775 CPU Installation NOTE: To enable Hyper-Threading, the CPU and chipset must both support it. WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed.
KINO-G45A Mini-ITX Motherboard Step 1: Remove the protective cover. The black protective cover can be removed by pulling up on the tab labeled "Remove". See Figure 4-2. Figure 4-2: Remove Protective Cover Step 2: Open the socket. Disengage the load lever by pressing the lever down and slightly outward to clear the retention tab.
KINO-G45A Mini-ITX Motherboard Step 4: Orientate the CPU properly. The contact array should be facing the CPU socket. Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the CPU socket. Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
KINO-G45A Mini-ITX Motherboard 4.2.2 Socket LGA775 Cooling Kit Installation WARNING: DO NOT use the original Intel® heat sink and fan. A proprietary one is recommended. Figure 4-5: Cooling Kits (CF-520 and CF-775A) The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.
Step 6: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the KINO-G45A. Carefully route the cable and avoid heat generating chips and fan blades. Step 0:...
KINO-G45A Mini-ITX Motherboard 4.2.3 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-7. Figure 4-7: DIMM Installation Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-7.
KINO-G45A Mini-ITX Motherboard 4.3 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To...
Figure 4-9: Clear BIOS Jumper Location 4.3.3 SATA Drive Connection The KINO-G45A is shipped with two SATA drive cables and one SATA drive power cable. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
Step 4: Figure 4-11: SATA Power Drive Connection 4.3.4 USB Cable (Dual Port) with Slot Bracket The KINO-G45A is shipped with a dual port USB 2.0 cable. To connect the USB cable connector, please follow the steps below. Step 5: Locate the connectors.
Step 7: Insert the cable connectors. Once the cable connectors are properly aligned with the USB connectors on the KINO-G45A, connect the cable connectors to the on-board connectors. See Figure 4-12. Figure 4-12: Dual USB Cable Connection Step 8: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a bracket.
This section describes connecting devices to the external connectors on the KINO-G45A. 4.4.1 Audio Connector The audio jacks on the external audio connector enable the KINO-G45A to be connected to a stereo sound setup. Each jack supports both input and output. When connecting a device, the High Definition Audio utility will automatically detect input or output.
KINO-G45A Mini-ITX Motherboard 4.4.2 DVI Display Device Connection The KINO-G45A has a single female DVI-D connector on the external peripheral interface panel. The DVI-D connector is connected to a digital display device. To connect a digital display device to the KINO-G45A, please follow the instructions below.
Step 0: 4.4.4 PS/2 Keyboard and Mouse Connection The KINO-G45A has a dual PS/2 connector on the external peripheral interface panel. The dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the steps below to connect a keyboard and mouse to the KINO-G45A.
4.4.5 USB Connection (Dual Connector) The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the KINO-G45A. Step 3: Locate the USB Series "A" receptacle connectors. The location of the USB Series "A"...
Figure 4-17: USB Connector 4.4.6 VGA Monitor Connection The KINO-G45A has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the KINO-G45A, please follow the instructions below.
Step 0: 4.5 Software Installation All the drivers for the KINO-G45A are on the CD that came with the system. To install the drivers, please follow the steps below. Step 1: Insert the CD into a CD drive connected to the system.
KINO-G45A Mini-ITX Motherboard Figure 4-19: Introduction Screen Step 3: Click KINO-G45A. Step 4: A new screen with a list of available drivers appears (Figure 4-20). Figure 4-20: Available Drivers Step 5: Install all of the necessary drivers in this menu.
KINO-G45A Mini-ITX Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways.
KINO-G45A Mini-ITX Motherboard Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.
KINO-G45A Mini-ITX Motherboard 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset...
KINO-G45A Mini-ITX Motherboard The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced Settings Configure CPU ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ WARNING: Setting wrong values in below sections may cause system to malfunction > CPU Configuration > IDE Configuration > SuperIO Configuration Select Screen >...
KINO-G45A Mini-ITX Motherboard Brand String: Lists the brand name of the CPU being used Frequency: Lists the CPU processing speed FSB Speed: Lists the FSB speed Cache L1: Lists the CPU L1 cache size Cache L2: Lists the CPU L2 cache size 5.3.2 IDE Configuration...
KINO-G45A Mini-ITX Motherboard Disabled Disables the on-board ATA/IDE controller. Configures the on-board ATA/IDE controller to be in Enhanced EFAULT Enhanced mode. In this mode, IDE channels and SATA channels are separated. This mode supports up to 6 storage devices. Some legacy OS do not support this mode.
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Primary IDE Master Select the type of device ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ connected to the system Device :Not Detected Type [Auto] LBA/Large Mode [Auto] Block (Multi-Sector Transfer) [Auto] PIO Mode...
Page 75
KINO-G45A Mini-ITX Motherboard 32Bit Data Transfer: Enables 32-bit data transfer. Type [Auto] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete. Not Installed BIOS is prevented from searching for an IDE disk drive on the specified channel.
Page 76
KINO-G45A Mini-ITX Motherboard Block (Multi Sector Transfer) [Auto] Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-sector transfers. Disabled BIOS is prevented from using Multi-Sector Transfer on the specified channel. The data to and from the device occurs one sector at a time.
Page 77
KINO-G45A Mini-ITX Motherboard Auto BIOS auto detects the DMA mode. Use this value if the IDE EFAULT disk drive support cannot be determined. Single Word DMA mode 0 selected with a maximum data SWDMA0 transfer rate of 2.1 MB/s SWDMA1 Single Word DMA mode 1 selected with a maximum data transfer rate of 4.2 MB/s...
KINO-G45A Mini-ITX Motherboard S.M.A.R.T [Auto] Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Page 79
KINO-G45A Mini-ITX Motherboard Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to select the Serial Port 1 base address. No base address is assigned to Serial Port 1 Disabled 3F8/IRQ4 Serial Port 1 I/O port address is 3F8 and the interrupt...
KINO-G45A Mini-ITX Motherboard 5.3.4 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hardware Health Event Monitoring ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ CPU_FAN Mode Setting [Automatic Mode] CPU Temp.
Page 81
KINO-G45A Mini-ITX Motherboard PWM Manual mode The fan spins at the speed set in: Fan PWM control Temp. Limit of OFF [000] WARNING: CPU failure can result if this value is set too high The fan will turn off if the temperature falls below this value.
Page 82
KINO-G45A Mini-ITX Motherboard 0 PWM 1 PWM 2 PWM 4 PWM 8 PWM 16 PWM 32 PWM 64 PWM CPU Fan PWM Control [070] This value specifies the speed of the fan. PWM Minimum Mode: 0 PWM Maximum Mode: 127 Hardware Health Monitoring The following system parameters and values are shown.
KINO-G45A Mini-ITX Motherboard 5.3.5 AHCI Configuration NOTE: Advanced Host Controller Interface (AHCI) is a new programming interface for SATA host controllers. AHCI systems do not have master/slave designation for SATA devices, each device is treated as a master, and hardware-assisted native command queuing.
KINO-G45A Mini-ITX Motherboard 5.3.5.1 AHCI Port n Use the AHCI Port n configuration menu (BIOS Menu 9) to configure the drive connected to SATA connector n. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit AHCI Port0 Select the type of device ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...
KINO-G45A Mini-ITX Motherboard 5.3.6 Remote Access Configuration Use the Remote Access Configuration menu (BIOS Menu 10) to configure remote access parameters. The Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program to display and configure the BIOS settings.
Page 86
KINO-G45A Mini-ITX Motherboard Enabled Remote access configuration options shown below appear: Serial Port Number Serial Port Mode Flow Control Redirection after BIOS POST Terminal Type VT-UTF8 Combo Key Support These configuration options are discussed below. Serial Port Number [COM1] Use the Serial Port Number option to select the serial port used for remote access.
KINO-G45A Mini-ITX Motherboard NOTE: Identical baud rate setting musts be set on the host (a management computer running a terminal software) and the slave Redirection After BIOS POST [Always] Use the Redirection After BIOS POST option to specify when console redirection should occur.
KINO-G45A Mini-ITX Motherboard Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced PCI/PnP Settings Available: Specified IRQ ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ is available to be use the PCI/PnP devices WARNING: Setting wrong values in below sections Reserved: Specified IRQ may cause system to malfunction...
Page 91
KINO-G45A Mini-ITX Motherboard IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device. Available The specified DMA is available to be used by...
KINO-G45A Mini-ITX Motherboard 5.5 Boot Use the Boot menu (BIOS Menu 13) to configure system boot options. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Boot Settings Configure settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ during system boot. > Boot Settings Configuration > Boot Device Priority >...
Page 93
KINO-G45A Mini-ITX Motherboard Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Enabled Some POST procedures are skipped to decrease EFAULT the system boot time...
Page 94
KINO-G45A Mini-ITX Motherboard Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up. Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad.
KINO-G45A Mini-ITX Motherboard 5.5.2 Boot Device Priority Use the Boot Device Priority menu (BIOS Menu 15) to specify the boot sequence from the available devices. The drive sequence also depends on the boot sequence in the individual device section. BIOS SETUP UTILITY...
KINO-G45A Mini-ITX Motherboard 5.5.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. Only installed hard drives are shown. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hard Disk Drives Specifies the boot ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...
KINO-G45A Mini-ITX Motherboard 5.5.4 Removable Drives Use the Removable Drives menu (BIOS Menu 17) to specify the boot sequence of the removable drives. Only connected drives are shown. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Hard Disk Drives Specifies the boot ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...
KINO-G45A Mini-ITX Motherboard The boot sequence from the available devices is selected. If the “1st Drive” option is selected a list of available CD/DVD drives is shown. Select the first CD/DVD drive the system boots from. If the “1st Drive” is not used for booting this option may be disabled.
KINO-G45A Mini-ITX Motherboard Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change Supervisor Password.
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Advanced Chipset Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ WARNING: Setting wrong values in below section may cause system to malfunction. > Northbridge Configuration > Southbridge Configuration Select Screen ↑ ↓ Select Item...
Page 101
KINO-G45A Mini-ITX Motherboard Memory Remap Feature [Enabled] Use the Memory Remap Feature option to allow the overlapped PCI memory above the total physical memory to be remapped. Enabled Overlapped PCI memory can be remapped EFAULT Overlapped PCI memory cannot be remapped...
KINO-G45A Mini-ITX Motherboard Enable, 128 MB 128 MB of memory used by internal graphics device Aperture Size Select/Graphic Win Size [256 MB] Use the Aperture Size Select/Graphic Win Size option to select the size of the AGP aperture and the size of the GART (Graphics Address Relocation Table). The aperture is a...
KINO-G45A Mini-ITX Motherboard 128 MB 256 MB Default Maximum DVMT Boot Display Device Use the Boot Display Device option to select the display device used by the system when it boots. Configuration options are listed below. Auto EFAULT HDMI Sec. Display Device Use the Sec.
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Southbridge Chipset Configuration Go into On/Off, or Suspend ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ when Power button is pressed ASF Support [Enabled] HDA Controller [Enabled] Suspend Mode [S1 (POS)] Restore on AC Power Loss...
Page 106
KINO-G45A Mini-ITX Motherboard S1 (POS) The system enters S1 (POS) sleep state. The system EFAULT appears off. The CPU is stopped; RAM is refreshed; the system is running in a low power mode. System appears off. The CPU has no power; RAM is in S3 (STR) slow refresh;...
KINO-G45A Mini-ITX Motherboard Resume on PCI-Express WAKE# [Enabled] The Resume on PCI-Express WAKE# BIOS option specifies if the system is roused from a suspended or standby state when there is activity on the PCI-Express bus. Disabled Wake event not generated by PCI-Express activity...
KINO-G45A Mini-ITX Motherboard BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit Exit Options Exit system setup after ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ saving the changes. Save Changes and Exit F10 key can be used for Discard Changes and Exit this operation Discard Changes...
Page 110
KINO-G45A Mini-ITX Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Overview .........................58 System Time [xx:xx:xx] .......................59 System Date [xx/xx/xx] ......................59 SATA# Configurations [Compatible] .................61 Configure SATA#1 as [IDE]....................62 ...
Page 111
KINO-G45A Mini-ITX Motherboard USB Function [Enabled]......................77 USB 2.0 Controller [Enabled]....................77 Legacy USB Support [Enabled]..................78 USB2.0 Controller Mode [HiSpeed]..................78 IRQ# [Available] ........................79 DMA Channel# [Available] ....................80 Reserved Memory Size [Disabled] ..................80 Quick Boot [Enabled] ......................82 ...
Page 112
KINO-G45A Mini-ITX Motherboard Save Changes and Exit .......................97 Discard Changes and Exit....................97 Discard Changes........................97 Load Optimal Defaults......................97 Load Failsafe Defaults......................97 Page 101...
Page 114
KINO-G45A Mini-ITX Motherboard AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
Page 115
KINO-G45A Mini-ITX Motherboard DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
Page 116
KINO-G45A Mini-ITX Motherboard LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
KINO-G45A Mini-ITX Motherboard C.1 Introduction The DIO connector on the KINO-G45A is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices.
Page 120
KINO-G45A Mini-ITX Motherboard NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
Page 121
KINO-G45A Mini-ITX Motherboard NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
The compatible items described here have been tested by the IEI R&D team and found to be compatible with the KINO-G45A E.1 Compatible Operating Systems The following operating systems have been successfully run on the KINO-G45A. MS-DOS 6.22 Microsoft Windows XP (32-bit) Microsoft Windows 2000 Red Hat 9.0...
The memory modules listed below have been tested on the KINO-G45A other memory modules that comply with the specifications may also work on the KINO-G45A but have not been tested. The following memory modules have been successfully tested on the KINO-G45A.
KINO-G45A Mini-ITX Motherboard F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 127
KINO-G45A Mini-ITX Motherboard Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Biphenyls Diphenyl (Pb) (Hg) (Cd) Chromium (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...