Battery Connector - IEI Technology KINO-CV-KINO-CV-N26001 User Manual

3.2.1 Battery Connector

CAUTION:
Risk of explosion if battery is replaced by and incorrect type. Only
certified engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local
regulations.
CN Label: CN1
CN Type: 2-pin wafer
CN Location: See Figure 3-2
See Table 3-3
CN Pinouts:
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Figure 3-2: Battery Connector Location
Pin Description
1 Battery+
2 Ground
Table 3-3: Battery Connector Pinouts
Page 18
KINO-CV-D25501/N26001 SBC