Table of Contents
Advertisement
Figure 4-10: Dual USB Cable Connection
Step 4:
Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the
4.7.3 Keyboard/Mouse Connector (Optional)
The KINO-CV-D25501/N26001 is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
KINO-CV-D25501/N26001 and branches into two cables that are each connected to a
PS/2 connector, one for a mouse and one for a keyboard. To connect the keyboard/mouse
Y-cable connector please follow the steps below.
Step 1:
Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.
Page 58
KINO-CV-D25501/N26001 SBC
chassis.Step 0:
Advertisement
Table of Contents
