Ide Configuration - IEI Technology KINO-CV-KINO-CV-N26001 User Manual

Hyper-Threading: Indicates if the Intel HT Technology is supported by the
CPU.
Hyper Threading Function [Enabled]
Use the Hyper Threading function to enable or disable the CPU hyper threading function.
Disabled
Enabled

5.3.4 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 6) to change and/or set the configuration
of the IDE devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0
SATA Port1
Configure SATA as
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE
AHCI
Page 76
Disables the use of hyper threading technology
Enables the use of hyper threading technology
D
EFAULT
Not Present
Not Present
[IDE]
D Configures SATA devices as normal IDE device.
EFAULT
Configures SATA devices as normal AHCI device.
KINO-CV-D25501/N26001 SBC
Select a configuration
for SATA Controller.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit