Table of Contents
Advertisement
KINO-CV-D25501/N26001 SBC
Step 3:
Insert the VGA
insert the male connector from the VGA screen into the female connector on the
KINO-CV-D25501/N26001. See Figure 4-17.
Figure 4-17: VGA Connector
Step 4:
Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
4.9 Software Installation
All the drivers for the KINO-CV-D25501/N26001 are on the CD that came with the system.
To install the drivers, please follow the steps below.
Step 1:
Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
connector.
Once the connectors are properly aligned with the
Step 0:
Page 65
Advertisement
Table of Contents
