E Xternal P Eripheral I Nterface C Onnection - IEI Technology KINO-CV-KINO-CV-N26001 User Manual

both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.
4.8 External Peripheral Interface Connection
Devices can be connected to the external connectors. To install external devices, follow
the directions in the subsections below.
4.8.1 Audio Connector
The audio jacks on the external audio connector enable the KINO-CV-D25501/N26001 to
be connected to a stereo sound setup. To install the audio devices, follow the steps below.
Step 1: Identify the audio plugs. The plugs on your home theater system or speakers
may not match the colors on the rear panel. If audio plugs are plugged into the
wrong jacks, sound quality will be very bad.
Step 2: Plug the audio plugs into the audio jacks. Plug the audio plugs into the audio
jacks. If the plugs on your speakers are different, an adapter will need to be used
to plug them into the audio jacks.
Line Out port (Lime): Connects to a headphone or a speaker.
Microphone (Pink): Connects to a microphone.
Figure 4-12: Audio Connector
Page 60
KINO-CV-D25501/N26001 SBC