Acc/Dec Setting; Radius Input-14; Start The Centrifugation Run-14; End The Centrifugation Run-14 - Hanil Fleta 5 Operating Manual

4. Operation

4.7 Acc/Dec setting

① Press the Enter (
② Turn the Mode (
③ Turn the Enter (
④ Press the Enter (
▶ 0~9 Steps, 0 step is the lowest step, 9 step is the fastest step.
▶ Recommend accel/decal 5 step.
4.8 Radius input
① When the lid is closed, the rotor is recognized automatically.
② After recognizing the rotor, the radius is automatically set.
③ Press the Enter (
④ Turn the Enter (
⑤ Press the Enter (
4.9 Start the centrifugation run
① Check the all parameters are correct and the lid is closed.
② Press Start (
4.10 End the centrifugation
① Press Stop(
14 www.ihanil.com
) button in stand-by mode.
) button to move the cursor to 'ACC' or 'DEC'.
) button to the left or right to input the value.
) button to finish setting.
) button in stand-by mode.
) button to the left or right to input the value.
) button to finish setting.
) button.
) button to abort centrifugation.