Renault MEGANE E-TECH 100% ELECTRIC 2022 User Manual

page of 414

/ 414
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

MEGANE

100% ELECTRIC

vehicle user manual

Table of Contents

Chapters

Table of Contents

Summary of Contents for Renault MEGANE E-TECH 100% ELECTRIC 2022

Page 1 MEGANE 100% ELECTRIC vehicle user manual...
Page 3 Welcome to your new electric vehicle This driver’s handbook contains the information necessary: – for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and the technical developments it incorporates. –...
Page 4 EXTERIOR Map ➥ 1.21 Electric windows ➥ 3.23 Locking/unlocking the doors Windscreen wipers ➥ 1.121 and ➥ 1.126 ➥ 1.33 Demisting ➥ 3.6 and ➥ 3.11 Rear view mirrors ➥ 1.81 Bodywork maintenance ➥ 4.11 Charging ➥ 1.8 Lights: operation ➥ 1.112 Tyres ➥...
Page 5 PASSENGER COMPARTMENT Adjusting your driving po- Passenger compartment storage, fit- sition ➥ 1.44 tings ➥ 3.27 Rear headrests ➥ 3.32 Rear bench seat ➥ 3.33 Front headrests ➥ 1.37 Front seats ➥ 1.38 Child safety ➥ 1.62 Transporting objects in the lug- gage compartment ➥...
Page 6 DRIVER’S POSITION Trip computer controls Instrument panel ➥ 1.92 ➥ 1.100 Gear control ➥ 2.5 Multimedia screen ➥ 3.21 Exterior lights ➥ 1.112 Heated seat(s) ➥ 1.38 Heating/Air con- Cruise control ➥ 2.78 ditioning system ➥ 3.6 Speed limiter ➥ 2.74 Electronic parking brake ➥...
Page 7 DRIVING AIDS ABS (anti-lock braking system) Speed limiter ➥ 2.74 ESC (electronic stability program) Braking assistance Cruise control ➥ 2.78 Hill start assistance ➥ 2.27 Stop and Go adaptive cruise con- trol ➥ 2.83 Lane departure warning ➥ 2.32 Detection of road signs ➥ 2.71 Lane departure prevention...
Page 8 SAFETY ON BOARD Central Airbag ➥ 1.56 Front Airbags ➥ 1.49 Curtain Airbags ➥ 1.56 Deactivating the passen- ger’s front airbag ➥ 1.58 ➥ 1.76 Side Airbags ➥ 1.56 Seat belts ➥ 1.44...
Page 9 IDENTIFYING A VEHICLE - LABELS Technical Information for Review of a vehicle identification the emergency services number ➥ 6.2 ➥ 6.3 Vehicle identification plate ➥ 6.2 Engine identification ➥ 6.4 Tyre pressure label ➥ 2.22 ➥ 4.7...
Page 10 THE ENGINE COMPARTMENT (routine maintenance) Brake fluid ➥ 4.4 400 V electrical circuits Battery ➥ 4.9 ➥ 1.2 Coolant level ➥ 4.4 Windscreen washer fluid ➥ 4.4 Opening the bonnet ➥ 4.2...
Page 11 BREAKDOWN RECOVERY Replacing windscreen wiper blade(s) ➥ 5.20 Puncture ➥ 5.2 Tools ➥ 5.5 Replacing headlight bulbs ➥ 5.10 Front towing point ➥ 5.22 Replacing the rear screen wiper blade ➥ 5.20 Replacing rear light Fuses ➥ 5.17 bulbs ➥ 5.11 Rear towing point ➥...
Page 12 0.10...
Page 13 Sections Getting to know your vehicle ....... Driving ..............Your comfort ............Maintenance ............Practical advice ............ Technical specifications ........Alphabetical index ..........0.11...
Page 14 0.12...
Page 15: Table Of Contents
Section 1: Getting to know your Vehicle Electric vehicle: presentation, important recommendations, charging, programming ... . Card: general information, use, deadlocking ......... . . 1.21 Opening and closing the doors .
Page 16 ELECTRIC VEHICLE: introduction (1/5) 1 Electric charging connection (passenger side) 2 400 V traction battery 3 Electric motor 4 Orange electrical power cables 5 Secondary 12 V battery...
Page 17 ELECTRIC VEHICLE: introduction (2/5) Electric vehicles have special features, but operate in a similar manner to con- ventional vehicles. The main difference in electric vehicles is the exclusive use of electric energy instead of fuel, as used in convention vehicles. We therefore recommend that you read these instructions describing your elec- tric vehicle carefully.
Page 18 ELECTRIC VEHICLE: introduction (3/5) Batteries 400 V traction battery Secondary 12V battery This battery stores the energy neces- The second battery on your vehicle is Your electric vehicle has two types of sary to operate the motor in your elec- a secondary 12 V battery: this supplies battery: tric vehicle properly.
Page 19 ELECTRIC VEHICLE: introduction (4/5) The vehicle drive system in an electric vehicle uses a direct voltage of approxi- mately 400 volts. This system can get hot during and after switching off the ignition. Respect warning messages given “400 volt” electrical circuit The A symbol denotes the electrical el- on the labels in the vehicle.
Page 20 ELECTRIC VEHICLE: introduction (5/5) Driving Noise Pedestrian horn As with a car with an automatic gear- Electric vehicles are particularly quiet. The pedestrian horn enables you to box, you will have to get used to not You will not yet necessarily be used to warn others of your presence –...
Page 21 ELECTRIC VEHICLE: important recommendations Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shock which may present a risk to life. In the event of an accident or impact In the event of an accident or an impact to the underside of the vehicle (e.g.: striking a post, raised kerb or other street furni- ture), this may damage the electric circuit or the traction battery.
Page 22 ELECTRIC VEHICLE: charging (1/12) Charging schematic diagram 1 Specific wall socket or recharging ter- minal If you have any questions regarding the equipment needed for charging, 2 Charging cord please ask an authorised dealer. 3 Electric charging connection (passenger side)
Page 23 ELECTRIC VEHICLE: charging (2/12) Important recommendations for charging your vehicle Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shocks which could result in death. Charging Do not do anything to the vehicle during charging (washing, working in the engine compartment, etc.). In the event of the presence of water, signs of corrosion or foreign bodies in the charging cord connector or in the vehicle charg- ing socket, do not charge the vehicle.
Page 24 ELECTRIC VEHICLE: charging (3/12) Charging cord A Charging cord B Always read the charging cord instruc- tions carefully before using it B. This lead is specific to your vehicle and This cord allows: designed for connecting to wall sockets – in normal use, on a socket used only or public terminals to enable standard for the vehicle (14 A/16 A charge);...
Page 25 ELECTRIC VEHICLE: charging (4/12) Important recommendations for charging your vehicle Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shocks which could result in death. Choice of charging cord The standard charging cords supplied with the vehicle have been designed specifically for this vehicle.
Page 26 ELECTRIC VEHICLE: charging (5/12) Charging types that conform to European standards Alternating current (AC) If the information is displayed on the vehicle charging flap, follow the instruc- tions below. Before plugging in a charging lead, check that: – the colour and one of the letters of the inlet socket 1 correspond to the colour and one of the letters on the end 4 of the lead;...
Page 27 ELECTRIC VEHICLE: charging (6/12) Charging types that conform to European standards (continued) Direct current (DC) If the information is displayed on the vehicle charging flap, follow the instruc- tions below. Before plugging in a charging lead, make sure that the colour and one of the letters of the inlet socket 3 corre- spond to the colour and one of the let- ters on the end 5 of the charging lead.
Page 28 ELECTRIC VEHICLE: charging (7/12) The vehicle is equipped with two charg- ing connections located on the passen- ger side at the front of the vehicle: – E socket for charging up to 22 kW; – F socket, depending on the vehicle, for rapid charging.
Page 29 ELECTRIC VEHICLE: charging (8/12) Precautions The energy level available depends on Recommendations the battery temperature. It may there- For daily use, it is recommended that – In high temperatures, try to park and fore vary between stopping and restart- you charge your vehicle to 80% full to recharge the vehicle in a shaded/ ing the vehicle if the battery is cold or improve the battery service life.
Page 30 ELECTRIC VEHICLE: charging (9/12) – after you hear a locking click, check that the charging cord is properly plugged in. To check the locking, pull gently on the handle 10; – if you have programmed a deferred charge and you wish to start charg- ing immediately, press the button 7 to start charging ➥...
Page 31 ELECTRIC VEHICLE: charging (10/12) During charging, the warning light 9 – an estimate of the remaining charg- The display on the instrument panel flashes in blue. ing time (this is not displayed after disappears after a few seconds. It reap- about 95% charge);...
Page 32 ELECTRIC VEHICLE: charging (11/12) Note: immediately after a long charge of the traction battery, the cable may be hot. Please use the handles. Precautions to take when removing – unplug the charging lead 2 from the from the socket vehicle; –...
Page 33 ELECTRIC VEHICLE: charging (12/12) – connect to a domestic socket, an al- ternating voltage charging terminal or a quick charging terminal; – for any information on charging, please consult your vehicle user manual. Label 13 The label 13 located on the right-hand side reminds you of the following in- The label 13 located on the charg- structions:...
Page 34 ELECTRIC VEHICLE: programming charging When the programming is confirmed,  the indicator light lights up on the instrument panel. Note: charging will start if the engine is shut down and the vehicle is connected to a power supply and access is author- ised.
Page 35 CARDS: general information (1/3) The card is used for: card operating range – locking/unlocking of opening ele- This varies according to the environ- ments (doors, luggage compart- ment: take care not to accidentally lock ment) and folding out or in of front or unlock the vehicle by inadvertently door handles;...
Page 36 CARDS: general information (2/3) Interference Interference by factors in the immediate vicinity (external installations or the use of equipment operating on the same frequency as the remote control) may affect the operation of the remote con- Advice trol. Avoid leaving the card in hot, cold or Driver’s responsibility humid areas.
Page 37 CARDS: general information (3/3) Fitting a strap 7 Insert the hand strap into the 8 com- ponent and pass the end of the strap Slide the rear casing 5 downwards through the buckle. while pressing on zone A. Position the strap at the 6 opening and close the cartridge.
Page 38 “HANDS-FREE” CARD: use (1/5) Deactivating/activating the “hands-free” mode Depending on the vehicle, you can de- activate/activate unlocking when ap- proaching and locking when moving away from the vehicle. You can also disable/activate the sound Driver’s responsibility signal that is emitted upon locking when when parking or stopping moving away from the vehicle ➥...
Page 39 “HANDS-FREE” CARD: use (2/5) Hands-free unlocking, when Remote “Hands-free” locking If the card has been within the detection area 1 for approximately 15 minutes, approaching the vehicle; With the card on you, doors and lug- remote locking is disabled. To lock the gage compartment door closed, move With the card in access zone 1, the ve- vehicle, press button 3 on the card.
Page 40 “HANDS-FREE” CARD: use (3/5) Special features of the Special features relating to unlocking system “hands-free” locking Under certain circumstances, approach After locking in “hands-free” mode, you unlocking is deactivated: have to wait approximately three sec- onds to be able to unlock the vehicle –...
Page 41 “HANDS-FREE” CARD: use (4/5) Locking using the card With the doors and boot closed, press button 3: the vehicle locks. The front handles fold in and the hazard lights and side repeaters flash twice to indicate that the doors have locked and, on some vehicles, the door mirrors fold in automatically.
Page 42 “HANDS-FREE” CARD: use (5/5) Unlocking the charging cord Press button 5 to unlock the charging cable from the vehicle. Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone in your vehicle, even for a short time.
Page 43 CARD: deadlocking To activate deadlocking Press button 2 twice in quick succes- sion. The hazard lights and side repeaters flash twice slowly and flash three times quickly to indicate that the doors are locked and, depending on the ve- hicle, the door mirrors fold in automat- ically.
Page 44: Opening And Closing The Doors
OPENING AND CLOSING THE DOORS (1/3) Opening the doors from the When the vehicle is unlocked, a few Rear doors minutes after exiting the vehicle or if outside With the doors unlocked, slide your the ignition is on, slight pressure on the hand into the handle 3 and pull towards handle 1 fold out the handles electri- Front doors...
Page 45 OPENING AND CLOSING THE DOORS (2/3) Opening from the inside Door/tailgate open buzzer When driving, the handles fold away automatically:  Pull handle 4. When stationary, the 7 warning – as soon as the vehicle speed ex- From inside the vehicle, the front exte- light indicates when an opening ele- ceeds around 3 mph (5 km/h);...
Page 46 OPENING AND CLOSING THE DOORS (3/3) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone on your vehicle, even for a short time. They may pose a risk to themselves Special note or to others by starting the engine, Once the engine has been switched off,...
Page 47 LOCKING, UNLOCKING THE DOORS (1/3) If the card does not work: In certain cases, the card may not work: – when the card battery is drained, flat battery etc; – due to the use of electronic devices near to the remote control (e.g. mobile telephone);...
Page 48 LOCKING, UNLOCKING THE DOORS (2/3) Locking the doors manually Using the key integrated in the card Move the lock cover 3 by pressing the Turn screw 4 with the door open (using left part and insert the 2 key into the lock the end of the key) and close the door.
Page 49 LOCKING, UNLOCKING THE DOORS (3/3) Door and tailgate status Locking the doors without indicator the card When the ignition is on, the 5 switch For example, in the event of a dis- warning light indicates the locking charged battery or the card temporarily status of the opening elements: not working, etc.
Page 50: Automatic Locking When Driving
AUTOMATIC LOCKING WHEN DRIVING Operating faults NB: if a door is opened or closed, it will automatically lock again when the If you experience an operating fault vehicle reaches a speed of 6 mph (10 (no central locking, the indicator light 1 km/h).
Page 51 FRONT HEADRESTS To raise the headrest Raise it to its highest position (tilt the seatback backwards). Press button 2 and lift the headrest to release it. To refit the headrest Check that the headrest rods are clean 3. Insert the headrest rods into the holes 1 (tilt the seatback backwards).
Page 52 FRONT SEATS WITH MANUAL CONTROL (1/2) To raise or lower the seat base Move lever 3 as many times as neces- sary upwards or downwards. To tilt the seatback Lift handle 4 as far as possible and tilt the seatback to the desired position. Release the handle at the desired po- sition and make sure that it is locked.
Page 53 FRONT SEATS WITH MANUAL CONTROL (2/2) “Favourites” function Depending on the vehicle, by pressing the steering wheel control 6, you can activate the heated seats according to the stored use settings that you have previously defined. For more information on programming this function, please refer to the multi- media instructions.
Page 54 FRONT SEATS WITH ELECTRIC CONTROL (1/2) Adjusting the seat position On vehicles that are equipped, the switch 1 can be used to access the To move the seat forwards or back “Seats” menu on the multimedia screen Move switch 4 forwards or backwards. (see following pages).
Page 55 FRONT SEATS WITH ELECTRIC CONTROL (2/2) “Favourites” function Depending on the vehicle, by pressing the steering wheel control 6, you can activate the heated seats according to the stored use settings that you have previously defined. For more information on programming this function, please refer to the multi- media instructions.
Page 56 FRONT SEATS: Functions (1/2) Settings Refer to the multimedia instructions for Seats information on accessing the settings. Driver Passenger Massage You can activate or deactivate the fol- Lumbar lowing elements: Relaxing – easy driver/passenger access; Dynamic – visual feedback of current move- Intensity ment.
Page 57 FRONT SEATS: Functions (2/2) Position It is possible to save the driving posi- Seats tion for the driver’s seat and/or passen- Driver Passenger ger seat. Massage Lumbar The driving position includes the set- Relaxing tings for the seat base and seatback as Dynamic well as the door mirrors.
Page 58: Seat Belts
SEAT BELTS (1/5) Adjusting your driving Always wear your seat belt when trav- elling in your vehicle. You must also position comply with the legislation of the par- – Sit well back in your seat (having ticular country you are in. first removed your coat or jacket).
Page 59 SEAT BELTS (2/5) Locking Unwind the belt slowly and smoothly and ensure that buckle 3 locks into catch 5 (check that it is locked by pull- ing on buckle 3). If the belt jams, allow it to return slightly before attempting to unwind it again. If your seat belt is completely jammed, pull slowly, but firmly, so that just over 3 cm unwinds.
Page 60 SEAT BELTS (3/5) ß Driver’s seat belt reminder It is accompanied by the 6 symbol which and, depending on the vehi- appears for approximately 60 seconds cle, front passenger seat belt re- each time one of the rear seat belts is minder fastened or unfastened.
Page 61 SEAT BELTS (4/5) Adjusting the height of the Rear side seat belts 8 Rear centre seat belt 9 front seat belts The belts are locked, unlocked and Slowly unwind belt 9. adjusted in the same way as the front Use button 7 to adjust the seat belt Fasten the tongue 10 in the red belts.
Page 62 SEAT BELTS (5/5) The following information applies to the vehicle’s front and rear seat belts. – No modification may be made to the component parts of the originally fitted restraint system: seat belts, seats and their mountings. For special operations (e.g. fitting child seats), contact an authorised dealer. –...
Page 63 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/6) These are made up of: – Have the entire restraint – seat belt inertia reel pretension- system checked following ers; an accident. – central seat belt pretensioners; – No operation whatso- ever is permitted on any part –...
Page 64 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (2/6) Load limiter driver and passenger front Airbags Above a certain severity of impact, this mechanism is used to limit the force of Fitted to the driver and passenger the belt against the body so that it is at sides.
Page 65 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (3/6) Operating faults å This warning light comes on when the engine is started and then goes out after approximately 65 sec- onds. If it does not come on when the ignition is switched on or if it stays on, there is a fault in the system.
Page 66 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (4/6) The following conditions will trigger In a frontal impact with another vehi- In a side impact with another vehicle the pretensioners or airbags. cle of an equivalent or higher category, of an equivalent or higher category, at with an impact area equal to or greater an impact speed equal to or greater...
Page 67 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (5/6) In the following examples, the pre- In the following examples, the pre- – side impact to the front or rear of the tensioners or the airbags could op- tensioners or airbags might not op- vehicle;...
Page 68 METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (6/6) All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. Warnings concerning the driver’s airbag –...
Page 69 METHODS OF RESTRAINT IN ADDITION TO THE REAR SEAT BELTS These are made up of: – Have the entire restraint – side seat belt inertia reel preten- system checked following sioners; an accident. – chest force limiters. – No operation whatso- ever is permitted on any part These systems are designed to act in- of the system (pretensioners,...
Page 70 SIDE PROTECTION DEVICES Side Airbag Warning regarding the side airbag and central airbag This airbag is fitted to each of the front – Fitting seat covers is prohibited in the front seats as this could seats and is activated at the sides of affect the operation of the airbag passenger.
Page 71: Additional Methods Of Restraint
ADDITIONAL METHODS OF RESTRAINT All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. The airbag is designed to complement the action of the seat belt.
Page 72: Passenger Detection System
PASSENGER DETECTION SYSTEM (1/4) Depending on the vehicle, the pas- After the initialisation phase, if the senger detection system automatically system detects a change of status (e.g. manages the activation and deactiva- passenger seat occupied when the ig- tion of the passenger airbag according nition is switched on, then not occu- to whether the front passenger seat is pied), the following messages are dis-...
Page 73 PASSENGER DETECTION SYSTEM (2/4) The markings on the dashboard and the labels A on each side of the pas- senger sun visor 3 (such as the label above) remind you that you must not place a child in a rear-facing seat when the passenger airbag is activated.
Page 74 PASSENGER DETECTION SYSTEM (3/4)  ¹ If the activation warning light is If the deactivation warning light on when a rear-facing child seat is is on while an adult passenger is fitted: seated in the front passenger seat, it may not be correctly fitted. –...
Page 75 PASSENGER DETECTION SYSTEM (4/4) Additional factors affecting A wet seat may affect the effectiveness of the passenger detection system. If the operation of the system the front passenger seat is wet, dry it Seat belts help keeping the passenger immediately. in position on the seat during vehicle manoeuvring and braking.
Page 76: Child Safety: General Information
CHILD SAFETY: General information (1/2) Carrying children Please ensure that you comply with the legislation of your country. Children, and adults, must be correctly seated and strapped in for all journeys. The children being carried in your vehi- cle are your responsibility. Driver’s responsibility A child is not a miniature adult.
Page 77 CHILD SAFETY: General information (2/2) Using a child seat Before fitting a child seat, read the manual and respect its instructions. If The level of protection offered by the you experience any difficulties during child seat depends on its ability to re- installation, contact the manufacturer strain your child and on its installation.
Page 78 CHILD SAFETY: choosing a child seat Rear-facing child seats Forward-facing child seats Booster cushions A baby’s head is, proportionally, heavier Up to 18 kg or 4 years, the child may From 15 kg or 4 years, the child can than that of an adult and its neck is very travel on a forward-facing seat.
Page 79: Choosing A Child Seat Mounting
CHILD SAFETY: choosing a child seat mounting (1/3) There are two ways of attaching child seats: via the seat belt or using the ISOFIX system. Attachment via the seat belt The seat belt must be adjusted to ensure that it is effective in the event of harsh braking or an impact.
Page 80 CHILD SAFETY: choosing a child seat mounting (2/3) Attachment using the ISOFIX Attach the child seat with the ISOFIX system locks, if these are provided. The ISOFIX system allows quick, easy, safe fitting. Approved child seats ISOFIX are stand- ardised in accordance with current reg- The ISOFIX system consists of two ulations if any of the four cases below rings and, in some cases, a third ring.
Page 81 CHILD SAFETY: choosing a child seat mounting (3/3) The ISOFIX anchorage points have been exclu- sively designed for child seats with the ISOFIX system. Never fit a different type of child seat, seat belt or other objects to these anchorage points. Check that nothing is obstructing the anchorage points.
Page 82 CHILD SAFETY: fitting a child seat: general information (1/2) Some seats are not suitable for fitting The types of child seat indicated may After installing the child seat, when this child seats. not be available. Before using a differ- is possible, you can move the vehi- ent child seat, check with the manufac- cle seat forward if necessary (so as to The diagrams on pages ➥...
Page 83: Fitting A Child Seat
CHILD SAFETY: fitting a child seat: general information (2/2) In the rear side seat Always remove the headrest from the Rear centre seat rear seat on which the child seat is A carrycot can be installed across the Check that the belt is suitable for se- positioned ➥...
Page 84 CHILD SEATS: attachment by seat belt (1/3) The table below summarises the information already shown on the diagram on the next page, to ensure the regulations in force are respected. Five-seater version Front passenger seat Rear side Rear centre Type of child seat Weight of the child seats seat...
Page 85 CHILD SEATS: attachment by seat belt (2/3) X = Seat not suitable for fitting child seats of this type. U = Seat allowing a child seat with “Universal” approval to be attached by the seat belt; check that it can be fitted. (2) A carrycot can be installed across the vehicle and will take up at least two seats.
Page 86 CHILD SEATS: attachment by seat belt (3/3) ³ Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat. ² Seat not suitable for fitting child seats. Child seat attached using the belt ¬...
Page 87 CHILD SEATS: attachment using the ISOFIX SYSTEM (1/3) ² Seat which does not allow a child seat to be fitted. Child seat fitted using the ISOFIX mounting  Seat which allows a ISOFIX or i-Size child seat to be attached. ±...
Page 88 CHILD SEATS: attachment using the ISOFIX SYSTEM (2/3) The table below summarises the information already shown on the diagram on the previous page, to ensure the regula- tions in force are respected. Front passenger seat Weight of Size of seat Rear side Rear centre Type of child seat...
Page 89 CHILD SEATS: attachment using the ISOFIX SYSTEM (3/3) X = Seat not suitable for fitting child seats. U = Seat allowing a child seat with “Universal” approval to be attached by the seat belt; check that it can be fitted. IUF/IL = On equipped vehicles, seat which allows a child seat with “Universal/Semi-universal or vehicle-specific”...
Page 90: Child Safety: Deactivating, Activating The Front Passenger Airbag
CHILD SAFETY: deactivating, activating AIRBAG front passenger (1/3) The passenger airbag may only be activated or deacti- vated when the vehicle is stationary with the igni- tion off. If it is interfered with when the ve- hicle is being driven, indicator lights å...
Page 91 CHILD SAFETY: deactivating, activating AIRBAG front passenger (2/3) The markings on the dashboard and labels A on each side of the passen- ger sun visor 3 (example: label shown above) remind you of these instruc- tions. DANGER Since operation of the front passenger airbag is not compatible with the po- sition of a rear-facing child seat,...
Page 92 CHILD SAFETY: deactivating, activating AIRBAG front passenger (3/3) Operating faults It is forbidden to fit a rear-facing child seat to the front passenger seat if the airbag activation/deactivation system is faulty. Allowing any other passenger to sit in that seat is not recommended. Contact your approved dealer as soon as possible.
Page 93 STEERING WHEEL (1/2) Adjusting the steering wheel Steering wheel heating Deactivating the function height and depth (depending on vehicle) – Automatic: This function heats the steering Lower the lever 1 and position the The function switches off automatically wheel 4. steering wheel in the required position.
Page 94: Steering Wheel/Power-Assisted Steering
STEERING WHEEL (2/2) Power-assisted steering The variable power-assisted steering system is equipped with an electronic control system which alters the level of assistance to suit the vehicle speed. Steering is made easier during parking manoeuvres (for added comfort) while the force needed to steer increases progressively as the speed rises (for enhanced safety at high speeds).
Page 95 REAR VIEW MIRRORS (1/3) Electrical folding mirrors The door mirrors will fold-out automati- cally when the vehicle is unlocked. The door mirrors fold in when the vehicle is locked. You can deactivate/activate automatic folding of the door mirrors ➥ 1.108. You can force folding by pressing the 1 switch.
Page 96 REAR VIEW MIRRORS (2/3) Returning to the driving Recalling the memorised position position Moving from reverse gear to a forward Refer to the multimedia manual to gear is done: access recall of the saved position. – approximately 9 seconds after re- Select “...
Page 97 REAR VIEW MIRRORS (3/3) Interior rear view mirror Auto-dimming rear view mirror 5 The rear view mirror automatically dark- Its position can be adjusted. ens when you are being followed by a Rear view mirror with lever 4 vehicle using main beam headlights or in very bright lighting.
Page 98 CAMERA REAR VIEW (1/4) Depending on the vehicle, the rear When the ignition is switched on, the This function is an additional view can be displayed by the camera 1. rear view mirror 2 mounted on the aid. It cannot, therefore, Direct rear view by mirror remains avail- roof centre console displays the view under any circumstances...
Page 99 CAMERA REAR VIEW (2/4) Operation Switching off the function The camera’s field of vision does not The display switches off immediately cover the entire area behind the vehi- after the ignition is switched off. Depending on your vision, an ad- cle, particularly the blind spot area A.
Page 100 CAMERA REAR VIEW (3/4) Selecting the settings: a) adjusting the brightness; b) adjusting the vertical viewing angle; c) adjusting the horizontal viewing angle; d) adjusting the angle of rotation; e) activating/deactivating the settings menu display on the rear view mirror; f) selecting a language;...
Page 101 CAMERA REAR VIEW (4/4) Special features related to Operating faults the reverse gear When the system detects an operating fault, the rear view mirror 2 turns black, When the vehicle is reversing, consider the pictogram displayed at the top the images transmitted by the rear view right of the rear view mirror disappears camera (multimedia screen 9) in addi- and the LED 4 goes out.
Page 102: Driving Position
DRIVING POSITION: LEFT-HAND DRIVE (1/2) 1.88...
Page 103 DRIVING POSITION: LEFT-HAND DRIVE (2/2) The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY. 25 Bonnet release control. 1 Side air vents. 14 Accessories socket. 2 Stalk for: 15 Cup holder. 26 Controls for: – direction indicator lights; 16 Centre console storage compart- –...
Page 104 DRIVER’S POSITION RIGHT-HAND DRIVE (1/2) 1.90...
Page 105 DRIVER’S POSITION RIGHT-HAND DRIVE (2/2) The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY. 12 Controls for: 1 Side air vents. 18 Control for adjusting steering 2 Passenger airbag location. – activating/deactivating the elec- wheel height and reach. 3 Centre air vents.
Page 106: Warning Lights
WARNING LIGHTS (1/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.  Door status warning light In some cases, the appearance of a warning light is accompanied by a mes- ➥ 1.30 sage.  Handbrake or electronic ...
Page 107 WARNING LIGHTS (2/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.  Urgent stop warning light Warning light Electrotechnical system ®  warning light This lights up when the ignition If it appears in red during driv- ®...
Page 108 WARNING LIGHTS (3/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.  Ú Electric motor fault warning Secondary 12 V battery Anti-lock braking warning light charge warning light light When it comes on, this indicates a fault If it comes on, accompanied by the This lights up when the ignition is ®...
Page 109 WARNING LIGHTS (4/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.   Variable power assisted Lane departure system steering warning light warning light ➥ 2.32  It lights up when the ignition or the Lane departure prevention engine is switched on and goes off after system warning light ➥...
Page 110: Displays And Indicators
DISPLAYS AND INDICATORS (1/4) Selection of views – realistic scene: displays the speed, active driving aids, information area Depending on the vehicle, browse as well as your vehicle and its sur- using the control 1 to select the various roundings (lanes, vehicles around views on the instrument panel A.
Page 111 DISPLAYS AND INDICATORS (2/4) Speedometer 2. Ready to drive message 3. Information area 6, depending on the vehicle, browse using the control 10 to The vehicle speed is limited to approx- The READY message appears when select various widgets on the instru- imately 93 mph (150 km/h) (or 99 mph the engine starts and disappears when ment panel A:...
Page 112 DISPLAYS AND INDICATORS (3/4) Reserve threshold When the traction battery charge reaches approximately 7% or, depend- ing on the vehicle, approximately 12%,  the gauge and indicator light 15 appear in yellow, accompanied by a beep. To optimise your range ➥ 2.20. Immobilisation threshold imminent When the charge level reaches 4.5% or, depending on the vehicle, approx-...
Page 113 DISPLAYS AND INDICATORS (4/4) To return to the previous mode, repeat the same operation. Please refer to the multimedia instruc- tions for more information. Instrument panel in miles (option to switch to km/h) With the vehicle stationary and the engine switched on, from the multi- media screen 16, select the “Vehicle”...
Page 114: Trip Computer
TRIP COMPUTER: general information (1/2) Resetting the journey Repeatedly press up/down on the 1 switch to browse functions. parameters (reset button) With one of the trip parameters se- On the instrument panel A: lected as the display, press and hold a) journey settings: the switch 1 downwards until the dis- –...
Page 115 TRIP COMPUTER: general information (2/2) Interpreting some of the Resetting the estimated values displayed after range resetting After a full recharge of the traction bat- tery, you can select two types of reset- The values showing average energy ting: manual or automatic. consumption and range will become more stable and reliable the further you Manual reset...
Page 116 TRIP COMPUTER AND WARNING SYSTEM: journey parameters (1/3) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Consumption a) Trip settings. Current energy consumption. + 13,4 Average energy consumption. The value is displayed after having travelled at least 400 metres since 12,8 the last reset.
Page 117 TRIP COMPUTER AND WARNING SYSTEM: journey parameters (2/3) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected c) Service interval. Service in Distance remaining until the next service (displayed in miles/kilo- metres), then when the service nears, several scenarios are possible: 1,200 miles (1,936 km) –...
Page 118: Vehicle Settings Personalisation Menu
TRIP COMPUTER AND WARNING SYSTEM: journey parameters (3/3) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Settings d) Vehicle settings personalisation menu ➥ 1.108. (OK) e) Trip log. Tailgate open Successive display: –...
Page 119 TRIP COMPUTER AND WARNING SYSTEM: information messages These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages. Examples of messages Interpreting the display selected “Disconnect cable to start”...
Page 120 TRIP COMPUTER AND WARNING SYSTEM: operating fault messages © These appear with the warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle. ©...
Page 121 TRIP COMPUTER AND WARNING SYSTEM: warning message ® These appear with the warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Call an approved Dealer. Examples of warning messages are given in the following pages.
Page 122 VEHICLE SETTINGS CUSTOMISATION MENU (1/2) Adjusting the settings d) “Wiping”: – “Rear wiper when in reverse Select a tab then the function to be gear”; modified (the display depends on the – “Automatic front wiper”; vehicle equipment and country): – ... a) “Access”: Depending on the function, select: –...
Page 123 VEHICLE SETTINGS CUSTOMISATION MENU (2/2) – setting selection (access, welcome, lighting, wiper, etc.); – “Automated park assist” function; – ECO mode; – 360° camera; – ... For more information on programming this function, please refer to the multi- media instructions. “Favourites”...
Page 124: Clock And Outdoor Temperature
CLOCK AND OUTDOOR TEMPERATURE You can access various settings: – “Date format”; – “Time format”; – “Select country time zone”; – “Set the time zone”; – ... Please refer to the multimedia instruc- tions for further information. External temperature indicator If the power supply is cut (battery Special note: Setting the time...
Page 125: Audible And Visual Signals
AUDIBLE AND VISUAL SIGNALS Direction indicators Move the stalk 1 in the same direc- tion as you want to move the steering wheel. One-touch mode Briefly shift the stalk 1 upwards or downwards, not exceeding the point of resistance, then release it: the stalk will return to its original position and the direction indicator light concerned will flash three times.
Page 126: Exterior Lighting And Signals
EXTERIOR LIGHTING AND SIGNALS (1/7) Automatic operation Turn the ring 3 until the AUTO symbol is opposite the mark 2: with the engine running, the dipped beam headlights switch on or off automatically depend- ing on the brightness of the light out- side, without any action on stalk 1.
Page 127 EXTERIOR LIGHTING AND SIGNALS (2/7) Switching off the lights Adaptive front lighting system (depending on the vehicle) Turn the central ring to align the mark 4 This function automatically adjusts the with the symbol 5. The corresponding width and range of the dipped beam indicator light on the instrument panel headlights according to the speed and goes out.
Page 128 EXTERIOR LIGHTING AND SIGNALS (3/7) The main beam headlights come on au- tomatically if: – exterior light is weak; – no other vehicles or lighting are de- tected; – the vehicle speed is above approxi- mately 25 mph (40 km/h). If any of the above conditions are not fulfilled, the system switches to dipped beam headlights.
Page 129 EXTERIOR LIGHTING AND SIGNALS (4/7) Automatic main beam headlights (continued) Note: by pushing the stalk 1, the auto- matic main beam headlights function is  deactivated, the warning light the instrument panel goes out and the vehicle activates the main beam head- lights.
Page 130 EXTERIOR LIGHTING AND SIGNALS (5/7) Lights-on reminder buzzer Welcome and goodbye function If the lights are on after the engine is (depending on the vehicle) switched off, a warning beep sounds when the driver’s door is opened to Once the function is activated, the day- warn you that the lights are still on.
Page 131 EXTERIOR LIGHTING AND SIGNALS (6/7) With the engine stopped and the Deactivating the “see-me-home lights switched off, after opening lighting” feature the driver’s door, the ring 3 in posi- To switch off the lights before they go tion AUTO, pull the stalk 1 towards you: out automatically, turn ring 3 to any po- the side lights and dipped beam head- sition, then return it to position AUTO.
Page 132 EXTERIOR LIGHTING AND SIGNALS (7/7) Switching off the lights Turn the central ring to align the mark 4 with the symbol 7. The corresponding indicator light on the instrument panel goes out. The rear fog lights switch off when the exterior lights are switched off.
Page 133: Headlight Beam Adjustment
HEADLIGHT BEAM ADJUSTMENT (1/2) Examples of positions for adjusting control A according to the load Driver alone or with front passenger All seats occupied Driver with passengers and luggage Depending on the vehicle, the A switch (or load) reaching the maximum can be used to adjust the height of the permissible all-up weight headlight beams according to the load.
Page 134 HEADLIGHT BEAM ADJUSTMENT (2/2) If driving on the left in a left-hand drive vehicle (or vice versa), drivers must have the lights adjusted by an authorised dealer for the duration of the trip. Temporary adjustment Open the bonnet and identify the mark- ing B next to one of the front headlight projectors.
Page 135 WINDSCREEN WASH, WIPE (1/5) Vehicle fitted with intermittent Special note windscreen wipers When driving the vehicle, the wiping speed slows down whenever the ve- A single sweep hicle stops. For example, fast wiping A short push will trigger one sweep speed will slow to normal wiping speed.
Page 136 WINDSCREEN WASH, WIPE (2/5) When activating automatic wiping or when increasing sensitivity, one sweep of the blades is performed. Note: – the rain sensor is only intended as a driving aid. In the event of reduced visibility, the driver should manually activate the wipers.
Page 137 WINDSCREEN WASH, WIPE (3/5) Operating faults Special note In the event of a malfunction of the au- When driving the vehicle, the wiping tomatic wiping, the wiper is set to inter- speed slows down whenever the vehi- mittent wiping. Contact an authorised cle stops.
Page 138 WINDSCREEN WASH, WIPE (4/5) Specific front wiper position (service position) This position enables the blades to be lifted to remove them from the winds- creen. It may be useful to: – to clean the blades; – to release the blades from the winds- creen in winter;...
Page 139 WINDSCREEN WASH, WIPE (5/5) Note: in temperatures below zero, the washer liquid may freeze on the wind- screen, reducing visibility. Heat the windscreen using the demister control before cleaning. Efficiency of a wiper blade Check the condition of the wiper blades.
Page 140 REAR SCREEN WASH, WIPE (1/2) To stop the operation, pivot ring 3 again. Note: when washing using a roller type car wash, return the ring 3 on the stalk 1 to the stop position to deactivate automatic wiping. Follow usage recommendations. Efficiency of a wiper blade At the end of use, remember to return Check the condition of the wiper...
Page 141 REAR SCREEN WASH, WIPE (2/2) Activation/deactivation of the rear In the event of obstacles present on the screen wiper rear window (dirt, snow, etc.), the wiper will try to sweep away all the obstacles. Engaging reverse gear triggers inter- If an obstacle prevents the blade from mittent wiping (if the front wipers are in moving, it can be stopped.
Page 142 1.128...
Page 143 Section 2: Driving Starting, stopping the engine ............Gear control, electronic lever.
Page 144: Starting, Stopping The Engine
STARTING, STOPPING THE ENGINE (1/3) Starting the engine Special features – If any one of the starting conditions The card must be inserted in detection is not applied, the message “Apply zone 1. During a system update via the mul- brake + START”...
Page 145 STARTING, STOPPING THE ENGINE (2/3) The message “Place card on zone + START” appears on the instrument panel. Press the brake pedal, then place the 4 card (button side) in the place- ment area 3 (upper console A or lower console B depending on the vehicle).
Page 146 STARTING, STOPPING THE ENGINE (3/3) If the card is no longer in the passenger compartment when you try to switch the engine off, the message “Keycard absent : press/hold START” appears on the instrument panel: press button 2 for longer than two seconds. With the engine switched off, any ac- cessories being used (radio, etc.) will Driver’s responsibility...
Page 147: Gear Control, Electronic Lever
GEAR CONTROL, ELECTRONIC LEVER (1/4) Electronic selector lever 1 One-touch selector R: reverse Move the selector lever 1 one or two notches upwards or downwards to N: Neutral engage the desired position (R, N or D) D: automatic mode then release the lever and it will return to the stable position.
Page 148 GEAR CONTROL, ELECTRONIC LEVER (2/4) To disengage position P With the vehicle stationary and the engine running, press the brake pedal and, move the 1 selector lever upwards or downwards according to the position desired. If the brake pedal is not fully depressed, the message “Press brake pedal”...
Page 149 GEAR CONTROL, ELECTRONIC LEVER (3/4) Driving in automatic mode To select reverse gear With the vehicle stationary and the run- With the vehicle stationary and the ning and the brake pedal depressed, tilt engine running, move the 1 selector the selector lever 1 two notches down- lever two notches upwards to engage wards to engage the D position.
Page 150 GEAR CONTROL, ELECTRONIC LEVER (4/4) Parking the vehicle Operating faults As position P is automatically en- gaged when the engine is stopped, in Position P is engaged automatically In the event of an engine fault or an some situations (e.g. when using some and, if fitted, the electronic parking electrical fault (battery fault, etc.), make car washes) it may be necessary to...
Page 151: Regenerative Braking System
REGENERATIVE BRAKING SYSTEM Regenerative braking change Driving with paddles Regenerative braking levels paddles 1 and 2 The 3 warning light informs you of the By releasing the accelerator, the vehi- regenerative braking level: cle uses regenerative braking to slow Depending on the vehicle, you can use down the vehicle.
Page 152: Electronic Parking Brake
ELECTRONIC PARKING BRAKE (1/4) In all other instances, the electronic parking brake is not applied automati- cally. Manual mode must be used. For certain country-specific model ver- sions, the assisted brake application function is not activated. Refer to the information on “Manual operation”. To confirm that the electronic park- ing brake is applied, the warning light on the instrument panel and...
Page 153 ELECTRONIC PARKING BRAKE (2/4) Assisted operation (continued) Note: in some situations (electronic parking brake failure, manual release of the parking brake, etc.), a beep sounds and the message “WARNING: Apply Parking Brake” appears on the instru- ment panel to warn you that the elec- tronic parking brake has been released.
Page 154 ELECTRONIC PARKING BRAKE (3/4) – manually release the electronic park- ing brake (please see the informa- tion on “Manually releasing the elec- tronic parking brake” on the previous page); – depending on the vehicle, the park- ing brake is applied automatically. You will have to release it manually.
Page 155 ELECTRONIC PARKING BRAKE (4/4) For safety reasons, automatic release is deactivated when the driver’s door is open or not shut properly and the engine is running (in order to prevent the vehicle from moving without the driver). The “Release Parking Brake” message appears on the instrument panel when the driver depresses the accelerator.
Page 156: Autohold" Function
“AUTOHOLD" FUNCTION (1/2) Vehicle stopped (e.g. at a red light, an intersection, a traffic jam, etc.), the func- tion ensures braking force even when the driver releases the brake pedal. The braking force is released as soon as the driver accelerates sufficiently with a gear engaged.
Page 157 “AUTOHOLD" FUNCTION (2/2) Conditions for maintaining the Conditions for interrupting the braking force braking force The following conditions must be met: The following conditions must be met: – the driver’s door is closed; – the driver accelerates sufficiently with a gear engaged; –...
Page 158: Environment
ENVIRONMENT Please make your own Recycling Your vehicle has been designed with respect for the environment in mind for contribution towards Your vehicle is 85% recyclable and its entire service life: during production, protecting the environment 95% recoverable. use and at the end of its life. too.
Page 159: Driving Advice, Eco-Driving
DRIVING ADVICE, ECO-DRIVING (1/3) Range is accredited according to a Optimum use zone 0 standard regulatory method. Identical Indicates nil consumption. for all manufacturers, this enables vehi- cles to be compared with one another. “Recommended consumption” usage zone B Range in real time depends on vehi- cle usage conditions, equipment fitted The traction battery supplies the elec- and the user’s driving style.
Page 160 DRIVING ADVICE, ECO-DRIVING (2/3) Driving style indicator The larger the circle 1 in the green area, the better your speed, accelera- Informs you about the driving style tion and anticipation is: your driving is adopted in real time. This is shown by economical.
Page 161 DRIVING ADVICE, ECO-DRIVING (3/3) ECO mode Journey record ECO mode is a function that optimises For vehicles fitted with this, once the vehicle range. It acts on certain ener- engine is switched off, a Journey gy-consuming systems (air condition- Record is displayed on the multimedia ing, etc.) and on the vehicle's behaviour screen 3.
Page 162 VEHICLE RANGE: recommendations (1/2) In real usage, the range of an electric vehicle may vary depending on several factors over which you have partial con- trol, which may make a considerable difference to the vehicle range. These factors are: – speed and driving style; –...
Page 163 VEHICLE RANGE: recommendations (2/2) Vehicle loading Avoid pointlessly overloading your ve- hicle. Heating levels Tyres The use of heating or air-conditioning An under-inflated tyre increases energy reduces vehicle range. consumption. Comply with the speci- To maintain your vehicle range, you are fied tyre pressures for your vehicle.
Page 164 TYRE PRESSURE MONITOR (1/5) Resetting the standard level for the tyre pressures This should be done: – when the standard tyre pressure needs to be changed to adapt to usage conditions (empty, carrying a load, motorway driving, etc.); – after swapping a wheel (however this practice is not recommended);...
Page 165 TYRE PRESSURE MONITOR (2/5) The flashing tyres symbol indicates that the request to reset the reference tyre pressure value has been acknowl- edged. Reset can take several minutes of driv- ing. If the reset is followed by short journeys, the display of step 3 in the table on the following page may remain displayed after several successive restarts.
Page 166 TYRE PRESSURE MONITOR (3/5) The table below shows the possible messages related to the tyre resetting procedure. Steps Displays Readings With the ignition on and the vehicle stationary, to start resetting the pressure of all four tyres, press downwards and hold the 2 switch. The “---”...
Page 167 TYRE PRESSURE MONITOR (4/5) Readjustment of tyre Replacing wheels/tyres pressures Contact an Approved Dealer to replace the tyres and to find out about acces- The pressure of the four tyres must sories compatible with the system that be set when cold (refer to the label lo- are available from your dealer network: cated on the edge of the driver’s door).
Page 168 TYRE PRESSURE MONITOR (5/5) The information on the instrument panel signals any potential tyre pressure faults (e.g. deflated or punctured tyre). For ® your safety, the warning light requires you to stop immediately as soon as traffic conditions allow. Indicator Messages Displays Readings...
Page 169: Driver Correction Devices And Aids
DRIVER CORRECTION DEVICES, AIDS (1/5) ABS (anti-lock braking Depending on the vehicle, they com- prise: system) – the (anti-lock braking Under heavy braking, the ABS prevents system); the wheels from locking, allowing the stopping distance to be managed and – the electronic stability program keeping control of the vehicle.
Page 170 DRIVER CORRECTION DEVICES, AIDS (2/5) Electronic stability program Operating faults Understeer control ESC with understeer control This system optimises the action of the © – are lit on the in- and traction control ESC in the case of pronounced under- strument panel accompanied, de- steer (loss of front axle road holding).
Page 171 DRIVER CORRECTION DEVICES, AIDS (3/5) Operating faults Brake lights come on Operating faults When the system detects an operat- Depending on the vehicle, these may When the system detects an operating ing fault the message “Check ESC” and flash in the event of sudden decelera- fault the message “WARNING: Check ...
Page 172 DRIVER CORRECTION DEVICES, AIDS (4/5) Hill start assistance Depending on the gradient of the in- cline, this system assists the driver when starting on a hill. It prevents the vehicle from rolling backwards by au- The hill start assistance tomatically applying the brakes when system cannot completely the driver lifts his/her foot off the brake prevent the vehicle from...
Page 173 DRIVER CORRECTION DEVICES, AIDS (5/5) Regenerative braking system Operating faults © When braking, the regenerative brak- – lit on the instrument panel accompanied by the message ing system can convert the energy pro- “WARNING: Check Braking System duced by the vehicle deceleration into “: braking assistance is still oper- electric energy.
Page 174: Lane Departure Warning
LANE DEPARTURE WARNING (1/5) Location of the camera 1 Make sure the windscreen is not ob- scured (dirt, mud, snow, condensation etc.). Using information from the camera 1, the function warns the driver if they cross a (continuous or broken) line without activating the direction indica- tor lights.
Page 175 LANE DEPARTURE WARNING (2/5) To deactivate the function, press the 3 switch or deselect “Lane departure warning” in the “Lane keeping system “ menu.  Warning light goes out on the in- strument panel. If the lane departure warning was the only side function selected, the switch warning light 3 goes out and the mes- sage “”Lane keeping system deacti-...
Page 176 LANE DEPARTURE WARNING (3/5) The function triggers an alert if a line is crossed without the direction indica- tors being activated. The function alerts the driver: – by a vibration in the steering wheel;  – the warning light and 4 the in- dicator for the crossed line turn red.
Page 177 LANE DEPARTURE WARNING (4/5) Temporarily not available Conditions for non-activation of the system The system will cease to be available if: The system cannot be activated when: – very fast lane departure; – reverse gear is engaged; – driving continuously on a line; –...
Page 178 LANE DEPARTURE WARNING (5/5) Operating faults This function is an additional driving aid. This function is not under any In the event of a malfunction, the left circumstances intended to replace the due care and attention of the and right line indicators (and, depend- driver, who should at all times be in control of the vehicle.
Page 179: Lane Departure Prevention
LANE DEPARTURE PREVENTION (1/6) Location of the camera 1 Make sure the windscreen is not ob- scured (dirt, mud, snow, condensation etc.). Using information from the camera 1, the function triggers a corrective action on the vehicle steering system if a con- tinuous or broken line is crossed with- out the direction indicator lights having been activated.
Page 180 LANE DEPARTURE PREVENTION (2/6) If no side function is selected in the “Lane keeping system” menu, when the 3 switch is pressed the message “Lane keeping system not configured” is displayed on the instrument panel. The 3 switch warning light remains switched off.
Page 181 LANE DEPARTURE PREVENTION (3/6) In these cases: Special cases – the function triggers an action on the When using the function: vehicle’s steering system to correct – If the system can no longer detect the vehicle trajectory; any action by the driver on the steer- ...
Page 182 LANE DEPARTURE PREVENTION (4/6) Temporarily not available Conditions for non-activation of the system The system will cease to be available if: The system cannot be activated when: – very fast lane departure; – reverse gear is engaged; – driving continuously on a line; –...
Page 183 LANE DEPARTURE PREVENTION (5/6) Operating faults – “Lane departure anticipation”: adjust the line detection sensitivity level. To When the system detects an operating do this, select: fault, the left-hand and right-hand line  – “Late”: line detected when cross- indicators and the warning light ing;...
Page 184 LANE DEPARTURE PREVENTION (6/6) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. System servicing/repairs –...
Page 185: Blind Spot Warning
BLIND SPOT WARNING (1/6) Special feature Using information from the sensors in- stalled on each side of the rear bumper Ensure that the C area around the (area C), the function warns the driver: radars on each side of the rear bumper –...
Page 186 BLIND SPOT WARNING (2/6) Activation/deactivation Indicator 2 To activate or deactivate the function An indicator light 2 is located on each via the multimedia screen 1, refer to the rear view mirror 3. multimedia instructions. Note: Select ON or OFF. –...
Page 187 BLIND SPOT WARNING (3/6) Display E Conditions for non-function Direction indicator activated, the 2 – When driving on a road with tight warning light flashes when the func- bends; tion detects a vehicle in the blind spot – in reverse. warning area and/or a vehicle is rapidly If the vehicle is equipped with a towbar approaching from the rear on the side...
Page 188 BLIND SPOT WARNING (4/6) Operating faults If the system detects a fault, the mes- sage “Side radars to check” is displayed on the instrument panel. Consult an ap- proved dealer. – The system’s detection range operates according to a standard lane width. If you are driving in wide traf- fic lanes, the system might not be able to detect a vehicle in the...
Page 189 BLIND SPOT WARNING (5/6) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. The driver should always adapt their speed to the traffic conditions, regardless of the system indications.
Page 190 BLIND SPOT WARNING (6/6) Limitation of the system operation – The radar area should be kept clean and free of any modifications in order to ensure the proper operation of the system. – Small objects moving close to the vehicle (motorcycles, bicycles, pedestrians, etc.) may not be recognised by the system. –...
Page 191: Safe Distance Alert
SAFE DISTANCE ALERT (1/3) Location of the camera 1 Make sure the windscreen is not ob- scured (by dirt, mud, snow, condensa- tion etc.). Location of the radar 2 Ensure that the radar area is not ob- structed (by dirt, mud, snow, a badly fitted front number plate), impacted, modified (including painting) or hidden by any accessory fitted on the front of...
Page 192 SAFE DISTANCE ALERT (2/3) – C (orange): the time interval falls be- tween around 1 and 2 seconds (in- sufficient distance between the two vehicles); – D (red): the time interval is less than or equal to around one second (very insufficient distance between the two The measurement is dis- vehicles).
Page 193 SAFE DISTANCE ALERT (3/3) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. System servicing/repairs –...
Page 194: Advanced Safety
ADVANCED SAFETY (1/17) The “Advanced safety” system com- prises: – active emergency braking; – emergency lane departure preven- tion. The “Advanced safety” system uses information from the camera 1, front radar 2 and, depending on the vehicle, side radars 3. Location of the camera 1 Location of the side radars 3 Make sure the windscreen is not ob-...
Page 195 ADVANCED SAFETY (2/17) Activating, deactivating the system from the multimedia screen 4 From the “Vehicle” World on your multi- media screen 4, press the “Driving as- sistance” menu, then the “Advanced safety” menu to access the activation/ deactivation of the function. ...
Page 196 ADVANCED SAFETY (3/17) The system informs the driver if there is a risk of head-on collision to enable appropriate emergency manoeuvres (pressing the brake pedal and/or turn- ing the steering wheel). Depending on the reactivity of the driver, the system can assist with brak- ing in order to limit damage or prevent a collision.
Page 197 ADVANCED SAFETY (4/17) Collision risk alert Note: if the driver uses the vehicle con- trols (steering wheel, pedals, etc.) the  system may delay certain operations or red warning light or, de- not activate. pending on the vehicle, the display 5 and the “Brake”...
Page 198 ADVANCED SAFETY (5/17) Active emergency braking Special features of stationary vehicles (continued) Stationary vehicles are detected when Special features of oncoming your vehicle is being driven at a speed vehicles in the context of a between approximately 5 mph (8 km/h) manoeuvre to change direction and 50 mph (80 km/h).
Page 199 ADVANCED SAFETY (6/17) Active emergency braking Note: if the driver uses the vehicle con- trols (steering wheel, pedals, etc.) the (continued) system may delay certain operations or Detection of pedestrians and not activate. cyclists When driving at a speed between ap- proximately 5 mph (8 km/h) and 53 mph (85 km/h), if there is a risk of collision with a cyclist or pedestrian, the system:...
Page 200 ADVANCED SAFETY (7/17) Temporarily not available If this is not the case, this may arise from another cause; contact an Approved If the system detects a temporary fault Dealer.  warning light illuminates, or  Operating faults depending on the vehicle, the When the function detects an operat- warning light illuminates in yellow on ©...
Page 201 ADVANCED SAFETY (8/17) Active emergency braking This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. The triggering of this function may be delayed or prevented when the system detects clear signs of control of the vehicle by the driver (action on the steer- ing wheel, pedals etc.).
Page 202 ADVANCED SAFETY (9/17) System disturbance Some conditions can disturb or damage the operation of the system, such as: – a complex environment (metal bridge, tunnel etc.); – poor weather conditions (snow, rain, hail, black ice etc.); – poor visibility (night, fog etc.); –...
Page 203 ADVANCED SAFETY (10/17) Deactivating the function You must disable the function if: – the brake lights are not functioning; – the area of the camera has been damaged (e.g. on the inside or outside of the windscreen); – the front of the vehicle was damaged (impact, distortion, scratch on the radar etc.); –...
Page 204 ADVANCED SAFETY (11/17) Depending on the vehicle, using in- formation from the radars 3 and the camera 1, the function triggers cor- rective action on the vehicle steering system. In the event of a risk of colli- sion with a vehicle moving at the same speed or a higher speed, located in the detection area of the rear radars (emer- gency lane departure prevention in...
Page 205 ADVANCED SAFETY (12/17) Emergency lane departure prevention (continued) Roadside detection When driving from approximately 5 mph (8 km/h), when approaching the roadside (central reservation, barrier, pavement, embankment, etc.), without the direction indicator having been acti- vated, the system: – warns you of a collision risk: the 6 symbol lights up on the instru- ment panel accompanied by the message “Lane departure”;...
Page 206 ADVANCED SAFETY (13/17) Emergency lane departure prevention (continued) Detection of an oncoming vehicle When driving at a speed between ap- proximately 40 mph (65 km/h) and 68 mph (110 km/h), if there is a risk of collision with a vehicle coming from the opposite direction in an adjacent lane and within the detection zone B, with- out the direction indicator having been...
Page 207 ADVANCED SAFETY (14/17) Emergency lane departure prevention (continued) If case of overtaking (depending on the vehicle) While driving from approximately 5 mph (8 km/h), when approaching a line (con- tinuous or broken) and there is a risk of collision with a vehicle located in the blind spot C moving in the same direc- tion as your vehicle or with a vehicle that is rapidly approaching from behind...
Page 208 ADVANCED SAFETY (15/17) Emergency lane departure Depending on the vehicle, if one of the side radars is obscured the message prevention “Check Side radars” will appear on the (continued) instrument panel. Temporarily not available When the front radar is obscured, the “Front radar no visibility”...
Page 209 ADVANCED SAFETY (16/17) Conditions for non-activation Operating faults If the vehicle is equipped with a towbar that is recognised by the system, the of the system When the function detects an oper-  © warning light lights up yellow ating fault, the warning lights The system cannot be activated when: ...
Page 210 ADVANCED SAFETY (17/17) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. System servicing/repairs –...
Page 211: Driver Vigilance Warning
DRIVER VIGILANCE WARNING (1/2) The driver vigilance warning is a func- tion that analyses the behaviour of the driver (driving style, direction of the ve- hicle, etc.) and alerts them if there is a risk of fatigue or impaired attention. It takes into account indicators such as: –...
Page 212 DRIVER VIGILANCE WARNING (2/2) The limits of the driver Note: vigilance warning – the system is deactivated automati- cally when the “Active Driver Assist” The driver vigilance warning may not is activated. Deactivating the “Active react in the following conditions: Driver Assist”...
Page 213: Detection Of Road Signs
DETECTION OF ROAD SIGNS (1/3) For vehicles which are equipped with it, Special situations the system also uses information from The system does not take into account the navigation system. exceptional speed limit measures, such Once the speed limiter or cruise con- as peak pollution days.
Page 214 DETECTION OF ROAD SIGNS (2/3) If the speed limit is exceeded, the circle around the panel flashes (warn- ing light 3) along with a sound signal to warn the driver. Operation Varying the limit speed If the speed limiter, cruise control or Warning lights adaptive cruise control setting differs The function displays the following...
Page 215 DETECTION OF ROAD SIGNS (3/3) Operating faults The system cannot detect the speed limit if: – the windscreen is not clean; – the camera is blinded by the sun; – there is insufficient visibility (night, fog etc.); – the signs are not legible (snow, etc.) or are hidden (by another vehicle or by trees);...
Page 216: Speed Limiter
SPEED LIMITER (1/4) Controls Driving 1 Start/Stop speed limiter switch When a limit speed has been set but  not yet reached, driving is similar to driving a vehicle without the speed lim-  iter function. 2 Cruise control On/Off switch Once you have reached the stored 3 Depending on the vehicle, road sign speed, no effort on the accelera-...
Page 217 SPEED LIMITER (2/4) Switching on To store the current speed, press the 4 control upwards on (RES/+) or down- Press the switch 1. The 6 warning light wards on (SET/-): the limit speed re- appears in grey. The “Speed limiter OK places the dashes and, depending on SET to activate”...
Page 218 SPEED LIMITER (3/4) Exceeding the limit speed It is possible to exceed the limit speed at any time. To do this: press the accel- erator pedal firmly and fully (beyond the resistance point). While the speed is being exceeded, the speed limiter flashes red on the instru- ment panel.
Page 219 SPEED LIMITER (4/4) Switching off the function The speed limiter function is inter- rupted: – when you press the 1 switch. In this case, the speed is no longer stored; – when you press the 2 switch. In this case the cruise control is selected and there is no stored speed.
Page 220: Cruise Control
CRUISE CONTROL (1/5) Controls 1 Start/Stop speed limiter switch   2 Cruise control On/Off switch 3 Depending on the vehicle, road sign  detection activation switch 4 Activation switch: This function is an addi- – upwards: increase cruising speed tional driving aid.
Page 221 CRUISE CONTROL (2/5) Driving Once a cruising speed is registered and the cruise control function is active, you may lift your foot off the accelera- tor pedal. Switching on Activating cruise control Press switch 2. At a steady speed above approximately 19 mph (30 km/h), push the 4 control The 6 warning light appears in grey.
Page 222 CRUISE CONTROL (3/5) Exceeding the cruising speed The cruising speed may be exceeded at any time by depressing the accelera- tor pedal. While it is being exceeded, the cruising speed flashes on the instrument panel. Then, release the accelerator pedal: after a few seconds, the vehicle will automatically return to its set cruising speed.
Page 223 CRUISE CONTROL (4/5) NB: if the speed previously stored is much higher than the current speed, the vehicle will accelerate more rapidly to reach this threshold. When the cruise control is set to standby, push the 4 control downwards on (SET/-) to reactivate the cruise con- trol function without taking into ac- count the stored speed –...
Page 224 CRUISE CONTROL (5/5) Switching off the function The warning light 6 disappears from the instrument panel to confirm that the The cruise control function is inter- function is no longer active. rupted: – when you press the 2 switch. In this case, there is no stored speed;...
Page 225 ADAPTIVE CRUISE CONTROL STOP AND GO (1/22) Based on information from a radar or If the vehicle in front stops, the Stop Note: camera, the Stop and Go adaptive and Go adaptive cruise control may – the driver must observe the maxi- cruise control function gives you the brake your vehicle to a complete stop mum speed limit and safe distances...
Page 226 ADAPTIVE CRUISE CONTROL STOP AND GO (2/22) This function is an additional driving aid. The function does not take the place of the driver. Therefore, it can under no circumstances replace the driver’s responsibility to respect speed limits and safe distances or to be vigilant (the driver must always be ready to brake).
Page 227 ADAPTIVE CRUISE CONTROL STOP AND GO (3/22) 5 Adjusting the following distance. 6 Adaptive cruise control main Stop/  Start switch 7 Contextual button (depending on the vehicle). Location of the camera 1 Controls Make sure the windscreen is not ob- 3 –...
Page 228 ADAPTIVE CRUISE CONTROL STOP AND GO (4/22) Switching on Press switch 6.  Warning light appears in grey, and the message “Adaptive cruise con- trol ON” appears on the instrument panel, accompanied by dashes to indi- cate that the cruise control function is activated and waiting to store a cruising speed.
Page 229 ADAPTIVE CRUISE CONTROL STOP AND GO (5/22) The cruising speed 9 replaces the dashes and cruise control is confirmed by the appearance of the cruising speed  in green and warning light If you try to activate the function above 93 mph (150 km/h) or, depending on the vehicle, 99 mph (160 km/h), the “Invalid Speed”...
Page 230 ADAPTIVE CRUISE CONTROL STOP AND GO (6/22) Adjustment You can choose to apply to cruising speed 9 a systematic speed devia- tion in relation to the detected speed limits 13. From the multimedia screen, in the “Vehicle” World, select “Driving assis- tance”.
Page 231 ADAPTIVE CRUISE CONTROL STOP AND GO (7/22) Activating cruise control with advance speed limit sign recognition (display B) (continued) Activation/deactivation From the multimedia screen, in the “Vehicle” World, select “Driving assis- tance”. Then, in the “Speed manage- ment” menu, select “To speed limita- tions”...
Page 232 ADAPTIVE CRUISE CONTROL STOP AND GO (8/22) – the speed detected by the system on Adjustment the next road section or speed limit You can choose to apply to cruising zone 14. speed 9 a systematic speed devia- The detected speed 14 is taken into ac- tion in relation to the detected speed count by the system.
Page 233 ADAPTIVE CRUISE CONTROL STOP AND GO (9/22) If the vehicle is approaching a bend or (When the function is not activated or roundabout, a 16 symbol appears on the subscription is no longer active, op- the instrument panel. The vehicle ad- eration is the same as setting the cruis- justs its speed to a speed appropriate ing speed with speed limit sign recog-...
Page 234 ADAPTIVE CRUISE CONTROL STOP AND GO (10/22) When automatically adapting the speed If the system detects a vehicle in your to the signs and/or road layout, it is lane, an outline of a vehicle 10 appears possible to ignore these events. Press above the distance gauge 11 on the in- the 3 control: strument panel.
Page 235 ADAPTIVE CRUISE CONTROL STOP AND GO (11/22) – distance gauge F: intermediate dis- tance 1 (corresponding to approxi- mately 1.6 seconds); – distance gauge G: short distance (corresponding to approximately 1.2 seconds). The selected distance gauge appears in green on the instrument panel. The other gauges remain in grey.
Page 236 ADAPTIVE CRUISE CONTROL STOP AND GO (12/22) Then, release the accelerator pedal: Note: the driver should always be the cruise control and safe distance ready for sudden incidents while control will automatically resume the driving and remains responsible for speed and distance instructions that controlling the vehicle: if the system you had previously selected.
Page 237 ADAPTIVE CRUISE CONTROL STOP AND GO (13/22) Putting the function on Note: depending on the vehicle, if the reception of the connected data standby is not optimal, the system automati- You can set the function to standby cally switches on standby the advance when: speed limit sign recognition and/or ad- vance recognition of the road layout...
Page 238 ADAPTIVE CRUISE CONTROL STOP AND GO (14/22) Exit from standby Depending on the situation, the system sounds a beep associated with: Based on the stored cruising speed – the orange alert H if the situation re- If a speed is stored, it can be recalled, quires the driver’s attention;...
Page 239 ADAPTIVE CRUISE CONTROL STOP AND GO (15/22) Temporary unavailability Conditions in certain geographical areas may hinder the function, for ex- (radar) ample: The radar is able to detect vehicles – arid zones, tunnels, long bridges or in front of your vehicle. The system lightly used roads without road lines, cannot operate correctly if the radar de- without signs or trees nearby;...
Page 240: Stop And Go Adaptive Cruise Control
ADAPTIVE CRUISE CONTROL STOP AND GO (16/22) Temporary unavailability Operating faults (camera) If an adaptive cruise control function Stop and Go operating fault is detected, The system cannot operate if the the "Check adaptive cruise control" camera is obscured (by dirt, mud, snow, message appears on the instrument condensation, etc.).
Page 241 ADAPTIVE CRUISE CONTROL STOP AND GO (17/22) Limitations of system The system cannot detect: Detection during cornering operation – vehicles arriving at intersections: slip When entering a corner or bend, the road (e.g. L) etc.; radar and/or camera may temporarily Vehicle detection not be able to detect the vehicle in front –...
Page 242 ADAPTIVE CRUISE CONTROL STOP AND GO (18/22) Detection of vehicles in adjacent Vehicles hidden due to variations in – vehicles transporting long objects lanes ground relief which exceed the line; The system may detect vehicles driving The system will not detect vehicles –...
Page 243 ADAPTIVE CRUISE CONTROL STOP AND GO (19/22) Stationary and slow moving – vehicles in front 17 that change lane, vehicles discovering a stationary vehicle 18 (e.g. S); When your speed is over approximately 31 mph (50 km/h), the system does –...
Page 244 ADAPTIVE CRUISE CONTROL STOP AND GO (20/22) This function is an additional driving aid. It can under no circumstances replace the driver’s responsibility to respect speed limits and safe dis- tances and to be vigilant. The driver must always be in control of the vehicle. Apart from the speed limit signs and road map information from the mapping (ve- hicles fitted with the “Road sign detection”...
Page 245 ADAPTIVE CRUISE CONTROL STOP AND GO (21/22) Deactivating the function You must disable the function if: – the vehicle is being towed (breakdowns); – the vehicle is towing a trailer or a caravan; – the vehicle is being driven in a tunnel or close to a metallic structure; –...
Page 246 ADAPTIVE CRUISE CONTROL STOP AND GO (22/22) In the event of system disturbance Some conditions can disturb or damage the operation of the system, such as: – the windscreen or bumper is obscured in the area of the radar (by dirt, ice, snow, condensation, number plate etc.); –...
Page 247: Active Driver Assist
ACTIVE DRIVER ASSIST (1/15) The Stop and Go adaptive The “Active Driver Assist” is a driv- The system controls acceleration and ing aid system for use outside built-up deceleration of your vehicle using the cruise control function. areas, on wide roads and with visible engine and braking system.
Page 248 ACTIVE DRIVER ASSIST (2/15) The “Lane centering assist.” Additional information function Depending on the vehicle, the “Active Driver Assist” function may be used Using information from a camera, the with other driving aid functions. “Lane centering assist.” function uses the steering system to direct the vehi- Please note that: cle to the middle of the lane.
Page 249 ACTIVE DRIVER ASSIST (3/15) 2.107...
Page 250 ACTIVE DRIVER ASSIST (4/15) Computer 1 Aerial and maps 3 continued Radar 8 continued The system can also adjust the vehi- Receives information from the radar The system’s maximum range is ap- and camera to determine the vehi- cle’s speed when approaching a bend proximately 150 metres.
Page 251 ACTIVE DRIVER ASSIST (5/15) 2.109...
Page 252 ACTIVE DRIVER ASSIST (6/15) Controls Displays on the instrument Steering wheel 23 panel Push upwards: puts the func- The driver must always keep their tion on standby or increases the hands on the steering wheel. If too Stop and Go adaptive cruise con- ...
Page 253 ACTIVE DRIVER ASSIST (7/15) The “Lane keeping system” must be activated. If the warning light of the 16 button is not lit, press the  button 16 The message “Lane keeping system activated” appears on the instrument panel to confirm that the function is ac- tivated.
Page 254 ACTIVE DRIVER ASSIST (8/15) Putting the “Lane centering – the system is temporarily disrupted (for example: camera obscured by assist.” function on standby dirt, mud, snow,condensation, etc.). The “Lane centering assist.” function is Certain actions carried out by the driver put on standby automatically when: also suspend the “Lane centering –...
Page 255 ACTIVE DRIVER ASSIST (9/15) – after approximately 30 seconds, If the driver does not put their hands on the “Keep hands on steering wheel” the steering wheel after the warning is  displayed, a beep sounds and the 24  message and the 24 , warning light appear in red on the instrument...
Page 256 ACTIVE DRIVER ASSIST (10/15) “Hands on steering wheel” alert continued Note: in some situations, the “Lane centering assist.” function may no longer detect your hands on the steer- ing wheel and may sound a signal: – the driver is holding the steering wheel very lightly;...
Page 257 ACTIVE DRIVER ASSIST (11/15) If the vehicle crosses a line com- pletely and moves out of its lane or if the bend is too sharp, the “Lane centering assist.” function is put on standby. Standby of the function is confirmed by ...
Page 258 ACTIVE DRIVER ASSIST (12/15) – the “Lane centering assist.” func- tion is deselected via the multime- dia screen (from the World “Vehicle”, select the tab “Driving assistance”, then the menu “Lane keeping system”).  The 22 warning light and the left- hand and right-hand line indicators 21 disappear from the instrument panel.
Page 259 ACTIVE DRIVER ASSIST (13/15) The “Active Driver Assist” is an additional driving aid. it can under no circumstances replace the driver’s responsibility to respect speed limits and safe distances and to be vigilant. The driver must always be in control of the vehicle. The driver must always adapt their trajectory and speed according to the surroundings and driving conditions, regardless of system indications.
Page 260 ACTIVE DRIVER ASSIST (14/15) Deactivating the system You must deactivate the system if: – the vehicle is travelling on a windy road; – the vehicle is being towed (breakdowns); – the vehicle is towing a trailer or a caravan; – the vehicle is being driven in a tunnel or close to a metallic structure; –...
Page 261 ACTIVE DRIVER ASSIST (15/15) Some conditions can disrupt or damage the operation of the system, for example: – obstruction of the windscreen or the radar area (by dirt, ice, snow, condensation etc.) Frequently check the cleanli- ness and condition of the windscreen, front wiper blades and front bumper; –...
Page 262: Parking Distance Control
PARKING DISTANCE CONTROL (1/6) Operating principle Ultrasonic sensors, indicated by arrows 1, are fitted in the bumpers to measure the distance between the ve- hicle and an obstacle. This measurement is indicated by beeps which become more frequent the closer you come to the obstacle, until they become a continuous beep when the vehicle is approximately 20 to 30 centimetres from the obstacle.
Page 263 PARKING DISTANCE CONTROL (2/6) Note: for vehicles fitted with the “360° Camera” function ➥ 2.135, analysis of the vehicle surroundings (areas A and B) is not displayed in “Bird’s eye view” or “Side view” mode. Operation Most objects located less near the front, rear and sides of the vehicle are detected.
Page 264 PARKING DISTANCE CONTROL (3/6) If a side obstacle is detected: – the beeps become faster and then sound continuously as the obstacle gets nearer. Green, orange and red zones will be displayed on the dis- play D; – if there is no risk of collision, no beep will sound when approaching the ob- stacle.
Page 265 PARKING DISTANCE CONTROL (4/6) Adjustment Deactivating the parking – when an operating fault is detected. distance control manually Note: if the vehicle is fitted with a Depending on the vehicle, with the ve- towbar recognised by the system, only hicle stationary, engine running, some You must disable the function if: the rear Park Assist function is deacti- settings can be adjusted from the multi-...
Page 266 PARKING DISTANCE CONTROL (5/6) System servicing/repairs – In the event of an impact, the alignment of the sensors may be altered and their operation may consequently be affected. Deactivate the function and consult an authorised dealer. – Any work in the area where the sensors are located (repairs, replacements, etc.) must be carried out by a qualified profes- sional.
Page 267 PARKING DISTANCE CONTROL (6/6) Limitation of the system operation – The area around the sensors must be kept clean and free of any modifications in order to ensure the proper operation of the system. – Small objects moving close to the vehicle (motorcycles, bicycles, pedestrians, etc.) may not be recognised by the system. –...
Page 268: Active Emergency Braking In Reverse Gear
ACTIVE EMERGENCY BRAKING IN REVERSE GEAR (1/3) This function is an addi- tional driving aid. This func- tion is not under any circum- stances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle.
Page 269 ACTIVE EMERGENCY BRAKING IN REVERSE GEAR (2/3) Operating faults When the system detects an operating Parking assistance fault, active emergency braking in re- Front verse gear is automatically deactivated. Side Rear The messages “Parking sensors una- Sound vailable” or “Check Parking sensors” or “Driving assist unavailable”...
Page 270 ACTIVE EMERGENCY BRAKING IN REVERSE GEAR (3/3) Active emergency braking in reverse gear This function is an additional driving aid. This function cannot, under any circumstances, replace the vigilance and re- sponsibility of the driver. Some climatic and environmental conditions can disrupt or damage the system. As a consequence, the driver should always be ready for sudden incidents while driving: always ensure that there are no small, narrow moving obstacles (such as a child, animal, pushchair, bicycle, stone, post, etc.) in the blind spot when manoeuvring.
Page 271: Parking Exit Warning
PARKING EXIT WARNING (1/4) Special feature Using information from the radars in- stalled on each side of the rear bumper Make sure that the radar area A is not (area A), the system notifies the driver The system’s detection capability obscured (by stickers, mud, snow etc.).
Page 272 PARKING EXIT WARNING (2/4) Activation/deactivation from Operation The indicators 4 on the multimedia screen show you on which side the ap- the multimedia screen 1 The function warns you if a vehicle is in proaching vehicle has been detected. area B and is approaching your vehicle. To activate or deactivate the function, Note: clean the camera regularly so refer to the multimedia instructions.
Page 273 PARKING EXIT WARNING (3/4) Operating faults If the vehicle is fitted with a towbar rec- ognised by the system and a trailer has been connected, the parking exit warn- ing is automatically deactivated and the following message is displayed on the instrument panel “Driving assist una- vailable”.
Page 274 PARKING EXIT WARNING (4/4) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. The system should under no circumstances be taken to be an obstacle detector or an anti-collision system.
Page 275: Reversing Camera
REVERSING CAMERA (1/2) Operation Fixed clearance gauge 3 Trailer guide line 5 The fixed clearance gauge comprises This is shown in blue on the multimedia When reverse gear is engaged, the coloured markers A, B and C indicating screen 2. This indicates the trajectory camera 1 located at the rear of the ve- the distance behind the vehicle: of the trailer towbar according to the...
Page 276 REVERSING CAMERA (2/2) “Zoom auto” function If an obstacle is detected behind the ve- hicle, the function “Zoom auto” switches the current display to a top rear view. To activate/deactivate the “Zoom auto” function, refer to the multimedia instruc- tions. The screen shows a reverse mirror Settings This function is an additional...
Page 277: 360° Camera
360° CAMERA (1/11) Operation Using information from cameras 1, 2, – bird’s eye view (using the 1, 2, and 3 and 3 located in the front bumper, door cameras): standard bird’s eye view The cameras transmit several separate mirrors and on the tailgate, as well as and pop-up bird’s eye view (when an views to the multimedia screen 5.
Page 278 360° CAMERA (2/11) Front camera 1 Rear camera 3 The view of the front camera is dis- The view of the rear camera is dis- For the rear views, the multimedia played on the multimedia screen 5. played on the multimedia screen 5. screen 5 shows a reverse image of the rear view as in a rear view mirror.
Page 279 360° CAMERA (3/11) Fixed clearance gauge 6 The fixed clearance gauge comprises coloured markers A, B and C indicating the distance behind the vehicle: – A(red) approximately 30 centimetres from the vehicle; The front, rear and side view guide- – B(yellow) approximately 70 centime- lines are a representation projected tres from the vehicle;...
Page 280 360° CAMERA (4/11) Driver’s side front side Bird’s eye view camera 2 The bird’s eye view is a combined rep- resentation from cameras 1, 2 and 3. The 2camera, fitted in the door mirror, transmits a side view to the multimedia It displays a view of the top of the vehi- screen 5.
Page 281 360° CAMERA (5/11) 360° Camera 360° Camera 360° Camera Look in all directions Look in all directions Look in all directions Side views Front panoramic view or rear View 3D panoramic view On the multimedia screen, by pressing On the multimedia screen, by press- the dedicated button 9, you get a view ing the dedicated button 11, you get a On the multimedia screen, by pressing...
Page 282 360° CAMERA (6/11) In addition to the sound alert, these in- dicator lines show the proximity of ob- Trailer view stacles via different colours: – green: obstacle between approxi- mately 50 and 70 cm; – yellow: obstacle between approxi- mately 30 and 50 cm; –...
Page 283 360° CAMERA (7/11) To activate or deactivate the “Zoom auto" function, please refer to the multi- 360° Camera media instructions. Look in all directions “Zoom auto" function If an obstacle is detected in the vicinity of the front or rear of the vehicle, the “Zoom auto”...
Page 284 360° CAMERA (8/11) Automatic mode is disabled: – when the gear lever is in position N or P for approximately three sec- onds; – when the vehicle speed moving for- ward exceeds 6 mph (10 km/h). Manual mode To activate manual mode, with the ve- hicle stationary and the engine running, from the “Vehicle”...
Page 285 360° CAMERA (9/11) Difference between the Driving or reversing towards a steep Driving or reversing towards a downhill slope protruding object estimated distance and actual distance The fixed guidelines 13 show the dis- Position H seems further than posi- tances as further than they actually are. tion J on the screen.
Page 286 360° CAMERA (10/11) Adjusting the display Limitation of the system operation The system is unable to display objects From the multimedia screen, when the located in certain areas. “360° Camera” system is displayed, you can change the views (e.g. Replace the In the front or rear view mode, the rear view with the panoramic rear view).
Page 287 360° CAMERA (11/11) If the gear lever is in the R position, the When shifting from reverse gear to D following views are available: position, the views available are: – screen split between the rear view/ – screen split between the front view/ bird’s eye view;...
Page 288: Automatic Parking
AUTOMATIC PARKING (1/6) You can take back control of the vehicle at any time by: – turning the steering wheel; – releasing the accelerator pedal; – or by pressing the brake pedal. Special features Ensure that the ultrasonic sensors and the cameras indicated by the arrows 1 are not obscured (by dirt, mud, snow, a badly fitted/attached number plate...
Page 289 AUTOMATIC PARKING (2/6) Automated park assist Drive forward Start Configure Automated Electric 360° Camera Seats park assist Air quality Driving Eco Driving assis- Parking assis- tance tance Vehicle Settings Look in all directions Switching on Choice of manoeuvre With the vehicle stationary or driving The system can perform three types of at less than approximately 19 mph (30 manoeuvre:...
Page 290 AUTOMATIC PARKING (3/6) The spaces turns green on the multi- The “Manoeuvre completed” message media screen and is marked with the appears on the multimedia screen to in- Automated park assist letter “P". dicate the end of the manoeuvre. The Press Start Button assisted parking brake is applied and –...
Page 291 AUTOMATIC PARKING (4/6) Parking exit The “Manoeuvre completed” message Special features appears on the multimedia screen to in- – Activate the “Automated park assist” – The system does not mount high dicate the end of the manoeuvre. You function; kerbs. can retake control of the vehicle by re- –...
Page 292 AUTOMATIC PARKING (5/6) Cancelling the manoeuvre Operating faults  The indicator light goes out on The manoeuvre is cancelled in the fol- When the function detects an operating the instrument panel, accompanied by lowing cases: fault, the following messages are dis- an audible warning.
Page 293 AUTOMATIC PARKING (6/6) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. Make sure that the manoeuvre complies with the applicable traffic regulations in your location.
Page 294: Safe Passenger Exit
SAFE PASSENGER EXIT (1/3) Description Special feature Using information from the sensors in- stalled on each side of the rear bumper This function is an additional driving aid Ensure that the C area around the (area C), the function warns the driver: for the safety of the occupants of the radars on each side of the rear bumper –...
Page 295 SAFE PASSENGER EXIT (2/3) Operation When the detected object is very close, a beep will sound, along with the warn- When a door is opened, when a moving ing message 3 “Lateral obstacle de- object is detected, the warning light 1 tected”...
Page 296 SAFE PASSENGER EXIT (3/3) Conditions for non-function Operating faults – the vehicle is moving and is not com- If the system detects a fault, the mes- pletely stationary; sage “Check Side radars” is displayed on the instrument panel. Consult an ap- –...
Page 297: Emergency Call
EMERGENCY CALL (1/3) If the vehicle is equipped, the emer- gency call function can be used to call the emergency services (without charge) automatically or manually in the event of an accident or illness, re- ducing the time it takes for the emer- gency services to arrive.
Page 298 EMERGENCY CALL (2/3) Automatic mode In the event of unintended operation, it is possible to cancel the call by press- If the automatic mode 2 warning light ing the 3 button for around two sec- appears in green this confirms that the onds, before the call is connected to automatic system is activated.
Page 299 EMERGENCY CALL (3/3) The system operates with a dedi- cated battery. The battery serv- ice life is approximately four years (the 1 warning light lights up in red to warn you when approaching expiry). Without the emergency call feature, the system is not trackable and will Consult an approved dealer.
Page 300 2.158...
Page 301 Section 3: Your Comfort Multi-Sense ..............Air vents: air outlets .
Page 302: Multi-Sense
MULTI-SENSE “Eco” mode Depending on the vehicle, the MULTI- SENSE system enables you to choose “Eco” mode focuses on energy saving. from several driving modes that affect Engine management and heating level driving, ambient lighting, comfort and allow reduced consumption ➥ 2.17. driving position: –...
Page 303: Air Vents: Air Outlets
AIR VENTS: air outlets (1/3) 1 Driver’s position air vents. 2 Windscreen demisting vent. 3 Passenger air vents. 4 Side window demister outlet. 7 Rear passenger central air vents. 5 Footwell heater outlets for front passengers. 8 Control panel 6 Footwell heater outlets for rear passengers.
Page 304 AIR VENTS: air outlets (2/3) Driver’s position air vents 1 Passenger air vents 3 Air flow To check the flow of the 1 and 3 air Direction Direction vents, press or lift the 12 control ac- To direct the air flow, turn the 1 air vents To direct the air flow, turn the air vents cording to the desired opening.
Page 305 AIR VENTS: air outlets (3/3) Rear seats (depending on the vehicle) Direction To direct the air flow, turn the air vents 7 using the cursors. Do not attach any objects to the air Air flow vents (e.g. telephone mounting). To check the flow of the air vents 7 turn Risk of damage.
Page 306: Manual Air Conditioning
MANUAL AIR CONDITIONING (1/5) 12 De-icing/demisting of the rear screen and, depending on the vehi- cle, the rear view mirrors. 13 “Clear View” function. 14 Adjusting the ventilation speed and stopping the system. 15 Adjusting the driver’s air tempera- ture. The controls 7 System off control.
Page 307 MANUAL AIR CONDITIONING (2/5) Activating the system When the vehicle is started, the system returns to the last programme used. The system is also functional when parked. Lift the 14 control to the desired venti- lation speed, then on the 11 control to activate the system.
Page 308 MANUAL AIR CONDITIONING (3/5) The positions are in the following order: ‚ All the air is then directed to the windscreen and front side window demisting vents.  The air flow is distributed be- tween front side window de- misting vents, the windscreen demist- ing vents and the footwells.
Page 309 MANUAL AIR CONDITIONING (4/5) “A/C MAX” function The “A/C MAX” function enables the user to feel the maximum power of their air conditioning system without any constraint or compromise related to the acoustics and the feeling of the air being too cold on the hands and face. This function involves automatic mod- ifications: –...
Page 310 MANUAL AIR CONDITIONING (5/5) Switching the air ECO mode recirculation on From the MULTI-SENSE menu acces- sible from the multimedia screen 16 or Press the 10 button: the integrated indi- Prolonged use of air recirculation by pressing the 17 switch, you can acti- cator light comes on.
Page 311: Automatic Climate Control
AUTOMATIC CLIMATE CONTROL (1/6) 14 Air-conditioning activation control in AUTO mode. 15 De-icing/demisting of the rear screen and, depending on the vehicle, the rear view mirrors. 16 “Clear View” function. 17 Adjusting the ventilation speed and stopping the system. 18 Adjusting the driver’s air tempera- ture.
Page 312 AUTOMATIC CLIMATE CONTROL (2/6) Activating the system When the vehicle is started, the system returns to the last programme used. The system is also functional when parked. Press the 14 control to activate the system or set the 17 control to the de- sired ventilation speed.
Page 313 AUTOMATIC CLIMATE CONTROL (3/6) Adjusting the distribution of air in the passenger compartment Press 11 one or more times to select the air distribution. The air distribution selected 8 is displayed on the multime- dia screen. The positions are in the fol- lowing order: ‚...
Page 314 AUTOMATIC CLIMATE CONTROL (4/6) Adjusting the ventilation speed. In automatic mode, the system uses the most suitable amount of air to reach and maintain the desired comfort level. You can still adjust the ventilation speed by pressing the 17 control to increase or reduce the ventilation speed.
Page 315 AUTOMATIC CLIMATE CONTROL (5/6) Manual use Press the 13 button: the integrated indi- cator light comes on. Prolonged use of this position may lead to odours, caused by non-renewal of air, and the formation of condensation on the windows. We therefore advise you to return to au- tomatic mode as soon as air recircula- tion is no longer needed, by pressing button 13.
Page 316 AUTOMATIC CLIMATE CONTROL (6/6) “Favourites” function ECO mode Depending on the vehicle, by pressing From the MULTI-SENSE menu acces- the steering wheel control 19, you can sible from the multimedia screen 20 or activate the following functions accord- by pressing the 21 switch, you can acti- ing to the stored use settings that you vate the ECO mode, which affects the have previously defined:...
Page 317: Air Conditioning: Programming
AIR CONDITIONING: programming (1/2) Air conditioning You can save several comfort pro- grammes by activating the following programming Driver’s responsibility settings: With the vehicle stationary, engine run- when parking or stopping – temperature adjustment; ning, from the “Vehicle” 2 World on the vehicle the multimedia screen 1, select the –...
Page 318 AIR CONDITIONING: programming (2/2) “Programme” activation Immediate activation of the Stopping the programmed air air-conditioning conditioning The function launches before the time scheduled by the customer, so that the It is possible to carry out immediate The air conditioning stops automati- vehicle reaches a comfortable temper- starting of the air conditioning, if: cally around ten minutes after the set...
Page 319 AIR CONDITIONING: information and operating instructions (1/2) Advice on use Operating faults Recommendations to limit energy consumption and maintain the In some situations, (air conditioning As a general rule, contact your ap- vehicle range off, air recirculation activated, ventila- proved dealer in the event of an oper- Drive with the air vents open and the tion speed at zero or low, etc.) you may ating fault.
Page 320 AIR CONDITIONING: information and operating instructions (2/2) Ñ Type of refrigerant fluid  Type of oil in the air condi- tioning circuit  Inflammable product  Consult the driver’s hand- book  Maintenance Quantity of refrigerant fluid present in the ve- x.xxx kg hicle.
Page 321: Multimedia Equipment
MULTIMEDIA EQUIPMENT (1/2) Multimedia sockets “USB- The presence and location of this equip- ment depends on the vehicle version. C” 2 and 5 1 Multimedia screen. The multimedia sockets USB-C 2 and 5 2 Multimedia sockets USB-C in the enable accessories approved by our upper A and lower B central console.
Page 322 MULTIMEDIA EQUIPMENT (2/2) Microphone 6 Induction charging area 7 (for the phone and voice assistant) ➥ 3.27 Using the telephone We remind you of the need to conform to the legislation in force concerning the use of such equipment. 3.22...
Page 323: Electric Windows
ELECTRIC WINDOWS (1/2) These systems operate with the igni- tion on or off, until one of the front doors is opened (limited to about 3 minutes). Driver’s responsibility Never leave your vehicle with the card or key inside, with a child, adult who is not self-sufficient or a pet in the vehicle, even for a short while.
Page 324 ELECTRIC WINDOWS (2/2) One-touch electric windows Remote control window Operating faults (continued) opening/closing In case of a fault when closing a window, the system reverts to normal Note: if the window detects resistance When unlocking the doors from the out- mode: pull the switch concerned up as when closing (e.g.
Page 325: Interior Lighting, Sun Visor
INTERIOR LIGHTING, SUN VISOR (1/2) Reading lights (depending on the vehicle) Press the 1, 2 or 3 spots to get: – permanent lighting; – lighting switches off immediately. Note: it is possible to deactivate/acti- vate the reading lights coming on when the doors are opened from the multime- dia screen ➥...
Page 326 INTERIOR LIGHTING, SUN VISOR (2/2) Luggage compartment light Sun visor Light 4 comes on when the luggage Lower the sun visor 5 over the wind- compartment is opened. screen or unclip it and turn it over the side window. Courtesy mirrors Lift the cover 6.
Page 327 PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (1/4) It is essential not to leave any ob- Front door storage Centre console storage jects (start-up card, USB drive, SD compartments 1 compartment or induction card, credit card, jewellery, keys, charging zone 2 coins, etc.) in the induction charging area 2 whilst charging your phone.
Page 328 PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (2/4) When turning corners, accelerating or braking, ensure that the recepta- cle being held by the cup holder is not dislodged. There is a risk of burning if hot liquid escapes. Central storage Centre armrest storage Do not drive with the cen- compartment 3 compartment 8...
Page 329 PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (3/4) Sun blind storage Glove box compartment 9 To open, press the catch 10. Can be used to hold motorway toll tick- It can hold a box of tissues, a bottle of ets, maps, etc. water, etc.
Page 330 PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (4/4) Grab handle 11 Rear door storage 13 storage pocket compartment 12 (depending on the vehicle) This offers support and can be held when the vehicle is being driven. Do not use it for getting into or out of the vehicle.
Page 331: Accessories Socket
ACCESSORIES SOCKET Accessories socket 1 It is provided for the purpose of con- necting accessories approved by our Technical Department. It can be used for the compressor of your tyre inflation kit, for example Connect accessories with ➥ 5.2. a maximum power of 120 watts (12 V) only.
Page 332: Rear Headrests
REAR HEADRESTS Position for use To refit the headrest When the headrest is set at the lowest position, this is for storage Raise the headrest as far as possible to Tilt the bench seat forwards, then insert only. It should not be in this position use it in the high position.
Page 333: Rear Bench Seat: Functions
REAR BENCH SEAT: functions Pull the vane 1 and lower the seat- back A. Note: for safety reasons, the seat- back A is equipped with a retaining system. You may experience resist- ance when handling. To replace the seatback, proceed in the reverse order to removal.
Page 334: Luggage Compartment, Rear Parcel Shelf
LUGGAGE COMPARTMENT REAR PARCEL SHELF (1/3) Opening Opening manually from inside the vehicle Press button 1 and lift the tailgate. If it is impossible to unlock the tailgate, it can be done manually from inside: Closing – access the luggage compartment by Lower the luggage compartment lid, folding forward the seatback(s) of depending on the vehicle, initially using...
Page 335 LUGGAGE COMPARTMENT REAR PARCEL SHELF (2/3) Charging lead storage tray This tray is for charging leads. The If there is water in the maximum permissible load for the tray charging lead storage tray, is 10 kg. signs of corrosion or foreign bodies in the charging lead To access it, open the luggage com- connector or in the vehicle charging...
Page 336 LUGGAGE COMPARTMENT REAR PARCEL SHELF (3/3) Rear parcel shelf – push the shelf 5 in and turn; – pull the shelf towards you. To remove: To refit, proceed in the reverse order to – lower the rear headrests; removal. – unhook the two cords 4; –...
Page 337: Transporting Objects In The Luggage Compartment
TRANSPORTING OBJECTS IN THE LUGGAGE COMPARTMENT Always position the objects transported so that the largest surface is against: – The rear bench seatback for normal loads (example A). – The front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (example B).
Page 338: Transporting Objects Towbar
TRANSPORTING OBJECTS towbar Permissible nose weight, maxi- mum permissible towing weight braked and unbraked: ➥ 6.6. Choice and fitting of towing Maximum dimension A: 838 mm. equipment Maximum weight of towing equip- ment: 25 kg. It is not permitted to fit a mechanical towing device (ball, hook, etc.) that Any towing device must not ob- is removable without tools or retract-...
Page 339: Roof Bars, Spoiler
ROOF BARS, SPOILER Precautions during use Handling the tailgate Before handling the tailgate, check the objects and/or accessories (bike rack, roof box, etc.) fitted to the roof bars: these must be correctly positioned and secured, so as not to hinder the opera- tion of the tailgate.
Page 340 3.40...
Page 341 Section 4: Maintenance Bonnet ............... . Levels .
Page 342: Bonnet
BONNET (1/2) The vehicle drive system in an electric vehicle uses a direct voltage of approxi- mately 400 volts. This system can get hot during and after switching off the ignition. Respect warning messages given on the labels in the vehicle. Any intervention or modification on the vehicle’s 400 V electrical system (components, cables, connectors,...
Page 343 BONNET (2/2) When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position. Risk of injury. Opening the bonnet Closing the bonnet Ensure that the bonnet is Lift the bonnet up and release the stay 4 Before closing the bonnet, make sure from its holder 3.
Page 344: Levels
LEVELS (1/3) The level should be read with the engine switched off and on level ground. For each reservoir, the level when cold must be between the “MINI” The vehicle drive system and “MAXI” marks on the coolant reser- in an electric vehicle uses voirs 1 and 2.
Page 345 LEVELS (2/3) Checking intervals Check the coolant levels regularly (very severe damage is likely to be caused to the engine and battery if there is insufficient coolant). If the level needs to be topped up, only use products approved by our Technical Department which ensure: –...
Page 346: Brake Fluid
LEVELS (3/3) Topping up After any operation on the hydraulic circuit, a specialist must replace the fluid. Only use fluids approved by our Technical Department (and taken from a sealed container). Level 2 It is normal for the level to drop as the brake shoes become worn, but it must never drop lower than the warning line “MINI”.
Page 347: Tyre Pressure
TYRE PRESSURE (1/2) Vehicle fitted with a tyre pressure monitoring system In the event of under-inflation (punc-  tures, etc.), the warning light appears on the instrument panel ➥ 2.22. Label A B : dimension of the tyres fitted to the vehicle.
Page 348 TYRE PRESSURES (2/2) Tyre safety and chain fitting: for information on servicing conditions and, depending on the vehicle ver- sion, the use of chains ➥ 5.6. For your safety, please re- spect the speed limit. When they need to be re- placed, only tyres of the same make, size, type and profile should be used on a single axle.
Page 349: Secondary 12 V Battery
SECONDARY 12 V BATTERY (1/2) Maintenance/replacement The charge status of the 12 volt bat- tery 1 can decrease, especially if you use your vehicle: The vehicle drive system – when the outside temperature drops; in an electric vehicle uses – after extended use of energy-con- a direct voltage of approxi- suming devices with the engine mately 400 volts.
Page 350 SECONDARY 12 V BATTERY (2/2) Breakdown recovery To avoid damaging your vehicle, do not recharge the secondary 12 V battery using: – an external battery charger; – a battery from another vehicle. Please contact an Authorised Dealer. Label A Observe the indications on the battery. 2 Naked flames and smoking are for bidden.
Page 351: Bodywork Maintenance
BODYWORK MAINTENANCE (1/3) You should A well-maintained vehicle will last Observe the vehicle stopping distances longer. It is therefore recommended to when driving on gravelled surfaces to Wash your car frequently, with the maintain the exterior of the vehicle reg- prevent paint damage.
Page 352 BODYWORK MAINTENANCE (2/3) What you should not do Degrease or clean using Wash the vehicle in bright sunlight or high-pressure cleaning freezing temperatures. equipment or by spray- Do not scrape off mud or dirt without ing products not ap- pre-wetting. proved by our Technical Department: Allow dirt to accumulate on the exterior.
Page 353 BODYWORK MAINTENANCE (3/3) Vehicles with a matte paint Using a roller type car wash Cleaning the headlights, finish sensors and cameras Return the wiper stalk to the park posi- tion ➥ 1.121. Check the mounting of ex- This type of paint requires certain pre- Use a soft cloth or cotton wool.
Page 354: Interior Trim Maintenance
INTERIOR TRIM MAINTENANCE (1/2) Glass instrument panel Textiles (seats, door trim, etc) A well-maintained vehicle will last longer. It is therefore recommended to (e.g. instrument panel, clock, exterior Vacuum-clean the textiles regularly. maintain the interior of the vehicle regu- temperature display etc.) larly.
Page 355 INTERIOR TRIM MAINTENANCE (2/2) Removal/replacing removable You should not: equipment originally fitted in Position objects such as deodorants, the vehicle scents etc. near air vents as this could damage your dashboard trim. If you need to remove equipment in order to clean the passenger com- partment (for example, mats), always ensure that they are correctly refitted and are the right way around (the driv-...
Page 356 4.16...
Page 357 Section 5: Practical Advice Tyre inflation kit ..............Tool kit .
Page 358 TYRE PRESSURE KIT (1/3) Do not attempt to use the The kit is only approved for inflation kit if the tyre has inflating the tyres of the ve- been damaged as a result hicle originally equipped of driving with a puncture. with the kit.
Page 359 TYRE PRESSURE KIT (2/3) With the engine running and hand- If a minimum pressure of 1.8 bar is brake applied: not reached after 15 minutes, repair is not possible; do not drive the ve- – disconnect any accessories previ- hicle but contact an approved dealer. ously connected to the vehicle’s ac- cessories sockets;...
Page 360 TYRE PRESSURE KIT (3/3) – Start immediately and drive at a speed between 12 to 37 mph (20 to 60 km/h) in order to distribute the product evenly in the tyre; after driv- ing a distance of 2 miles (3 km), stop Please be aware that a and check the pressure.
Page 361: Tool Kit
TOOL KIT After use, ensure the tools are correctly stored. The tools included in the tool kit depend on the vehicle. The tool kits A and B are located in the luggage compartment side pockets. Open the flaps of the side pockets to access the tools.
Page 362: Tyres (Tyre And Wheel Safety, Use In Winter)
TYRES (1/4) The tyres are the only contact between When the tyre tread has been worn to the vehicle and the road, so it is essen- the level of the wear indicators, they become visible 2: it is then necessary tial to keep them in good condition.
Page 363 TYRES (2/4) Tyre pressures Pressures should be checked when the Vehicle fitted with a tyre pressure tyres are cold; ignore higher pressures monitoring system Adhere to the tyre pressures. The tyre which may be reached in hot weather In the event of under-inflation (punc- pressures should be checked at least or following a journey at high speed.
Page 364 TYRES (3/4) Fitting new tyres Use in winter Snow or Winter tyres We would recommend that these be To fit new tyres, consult an approved Chains fitted to all four wheels to ensure that dealer. For safety reasons, fitting snow your vehicle retains maximum adhe- chains to the rear axle is strictly for- sion.
Page 365 TYRES (4/4) Studded tyres This type of equipment may only be used for a limited period and as laid down by local legislation. It is neces- sary to observe the speed specified by current legislation. These tyres must, at a minimum, be fitted to the two front wheels.
Page 366: Headlights (Changing Bulbs)
FRONT HEADLIGHTS: replacing the bulbs LED dipped beam/main beam headlights 1 Please see an authorised dealer. LED daytime running Any operation on (or modi- lights/side lights/direction fication to) the electrical indicators 2 system must be performed Please see an authorised dealer. by an approved dealer since an incorrect connection might damage the electrical equipment...
Page 367: Rear Lights (Changing Bulbs)
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (1/2) LED direction indicator/brake and side lights 3 Consult an approved dealer. High-level LED brake light 1 Consult an approved dealer. LED reversing lights and rear fog lights 2 Consult an approved dealer. 5.11...
Page 368: Indicator Lights (Changing Bulbs)
REAR AND SIDE LIGHTS: changing bulbs (2/2) LED number plate lights 4 Indicator lights 5 Consult an approved dealer. Consult an approved dealer. 5.12...
Page 369: Interior Lighting: Changing Bulbs
INTERIOR LIGHTING: changing bulbs Reading lights 1 and 2 Courtesy mirror lights 3 Luggage compartment light 4 Consult an authorised dealer. Please consult an authorised dealer. Consult an authorised dealer. 5.13...
Page 370: Hands-Free" Card: Battery
“HANDS-FREE” CARD: battery (1/2) The batteries are available from ap- proved Dealers, and their service life approximately two years. Check that there is no dye on the battery: risk of an incorrect electrical con- tact. Replacing the battery When refitting, proceed in the reverse If they need to be replaced, order, then press one of the buttons on be sure to use the same...
Page 371 “HANDS-FREE” CARD: battery (2/2) Operating faults If the battery is too weak to ensure cor- rect operation, you will still be able to start and lock/unlock the vehicle ➥ 1.33. Precautions relating to batteries: – keep (new or used) bat- teries out of reach of chil- dren;...
Page 372: Accessories
ACCESSORIES Electrical and electronic accessories Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level, po- sition of the aerial, etc.), make sure it is compatible with your vehicle. You can get advice from an authorised dealer. Before connecting an accessory to a socket, please ensure that you do not exceed the maximum power authorised for the socket ➥...
Page 373: Fuses
FUSES (1/3) Fuse box Once open, turn the stops 2 a quarter of Unhook the 3 wire to release the stor- a turn (movements B and C) to remove age compartment door to access the If any electrical component does not them.
Page 374 FUSES (2/3) Tweezers 5 Tilt the storage compartment door A downwards as far as it will go. Remove the fuse using the tweezers 5 You have direct access to the fuse com- located on the fuse plate. partment 4. To remove the fuse from the tweezers, slide the fuse to the side.
Page 375 FUSES (3/3) Allocation of fuses (the presence of certain fuse depends on the vehicle equipment level) Symbol Allocation Direction indicator lights, hazard warning lights × Brake lights Use the fuse allocation label in the storage compartment to identify the fuses. Rear windscreen wiper Certain fuses should only be re- placed by a qualified professional.
Page 376 WIPER BLADES: replacement (1/2) Replacing windscreen wiper To refit blades 2 To refit the wiper blade 2, insert it in its housing in the arm 3, then clip it until To replace the wipers, first put them in you hear a click. Make sure that the the service position B.
Page 377 WIPER BLADES: replacement (2/2) To refit To refit the wiper blade, proceed in re- verse order to removal. Make sure that the blade is correctly locked in position. – In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
Page 378: Towing
TOWING: breakdown (1/3) Before any towing, including on a flat- bed truck, put the gear control in N po- sition, unlock the steering column and release the parking brake. The speed specified by current legis- lation for towing must always be ob- served.
Page 379 TOWING: breakdown (2/3) Access to towing points Only use the front 2 and rear 5 towing points (never use the driveshafts or any other part of the vehicle). These towing points may only be used for pulling. They must never be used for lifting the vehicle directly or indirectly.
Page 380 TOWING: breakdown (3/3) Sport version Pull the part 6 to remove it and access Rear towing point the front towing point 2. The part 6 is Insert a flat-blade screwdriver or simi- Front towing point held by a link in prevent it from being lar in the recess provided, then pull to lost.
Page 381: Operating Faults
OPERATING FAULTS (1/6) The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact an approved dealer as soon as possible. FAULTS POSSIBLE CAUSES WHAT TO DO Impossible to charge the traction bat- The outdoor temperature is lower Recharge your vehicle in a more suitable tery.
Page 382 OPERATING FAULTS (2/6) FAULTS POSSIBLE CAUSES WHAT TO DO The card does not lock or unlock Card battery is flat. Replace the battery or have it replaced. You will the doors. still be able to lock, unlock, and start your vehicle ➥...
Page 383 OPERATING FAULTS (3/6) FAULTS POSSIBLE CAUSES WHAT TO DO Steering becomes heavy. Assistance overheating. Drive carefully at reduced speed, be aware of the level of force in the steering wheel needed to turn the wheels. Fault with the electric assistance Consult an authorised dealer.
Page 384 OPERATING FAULTS (4/6) Electrical equipment POSSIBLE CAUSES ACTION REQUIRED Vibrations. Tyres not inflated to correct pressures, Check the tyre pressures. If this is not the incorrectly balanced or damaged. problem, have them checked by an ap- proved Dealer. The wipers do not work. Wiper blades stuck.
Page 385 OPERATING FAULTS (5/6) Electrical equipment POSSIBLE CAUSES ACTION REQUIRED The headlights Only one: – LED blown; Consult an approved dealer. are not working. – disconnected wire or incorrectly-posi- Check and reconnect the wire or the con- tioned connector. nector. Both: the circuit is fused.
Page 386 OPERATING FAULTS (6/6) Stopped POSSIBLE CAUSES ACTION REQUIRED The air conditioning and ventilation fan This is not necessarily a fault, the air con- switch on after the ignition is switched ditioning compressor and the ventilation off or when the vehicle is being fan switch on to regulate the temperature charged.
Page 387 Section 6: Technical Specifications Vehicle identification plates ............Technical Information for the emergency services .
Page 388: Vehicle Identification Plates
VEHICLE IDENTIFICATION PLATES The information shown on the ve- 4 MMAC (Maximum permissible hicle identification plate should be all-up weight). quoted on all correspondence or 5 MTR (Gross train weight: vehicle orders. fully loaded, with trailer). 6 MMTA (Maximum Permissible The presence and location of the in- Weight) front axle.
Page 389: Technical Information For The Emergency Services
TECHNICAL INFORMATION FOR THE EMERGENCY SERVICES The QR Code on the A label allows emergency workers using a tablet or smartphone to immediately access the technical information useful for working on the vehicle in the event of an acci- dent. Ensure that the A label is always visible and present on the windscreen as well as the rear screen.
Page 390: Engine Identification, Engine Specification
ENGINE IDENTIFICATION, ENGINE SPECIFICATION Engine specification Please quote the information on the engine plate or label A in all corre- Engine type: 6AM spondence or orders. (Location varies depending on engine) 1 Engine type. 2 Engine suffix. 3 Engine serial number.
Page 391: Dimensions
DIMENSIONS (in metres) 0,800 2,685 0,715 1,555 to 1,565 4,200 1,505* 1,545 to 1,555 1,768 to 1,782** Unladen ** 2,055 with rear view mirrors open 1,860 with rear view mirrors folded away...
Page 392: Weights
WEIGHTS (in kg) The weights indicated for a basic vehicle without options: they vary depending on your vehicle’s equipment. Consult your approved Dealer. Maximum Permissible All-Up Weight (MMAC) Maximum Permissible Weight (MMTA) Weights indicated on the vehicle identification plate ➥ 6.2 Gross Train Weight (MTR) Braked Trailer Weight* found by calculating: MTR - MMAC...
Page 393: Replacement Parts And Repairs
REPLACEMENT PARTS AND REPAIRS Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same level of quality as the parts fitted originally. If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the repair order.
Page 394: Service Sheets
SERVICE SHEETS (1/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 395 SERVICE SHEETS (2/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 396 SERVICE SHEETS (3/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 397 SERVICE SHEETS (4/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 398 SERVICE SHEETS (5/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 399 SERVICE SHEETS (6/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp Service □ ........ □ Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km):...
Page 400: Anticorrosion Check
ANTICORROSION CHECK (1/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.14...
Page 401 ANTICORROSION CHECK (2/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.15...
Page 402 ANTICORROSION CHECK (3/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.16...
Page 403 ANTICORROSION CHECK (4/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.17...
Page 404 ANTICORROSION CHECK (5/5) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Stamp Repair to be carried out: Date of repair: Repair to be carried out: Stamp Date of repair: 6.18...
Page 405 ALPHABETICAL INDEX (1/7) airbags 12 volt battery child safety ............1.76 → 1.78 maintenance ............4.9 – 4.10 anti-corrosion check ..........6.14 → 6.18 12 volt battery ..........1.2 → 1.6, 4.9 – 4.10 anti-corrosion protection ............4.11 anti-lock braking system: ABS .........2.27 → 2.31 armrest 360° camera ............2.135 → 2.145 front .................3.29 ashtray ...................3.31 audible and visual signals ........... 1.111 «400 volt»...
Page 406 ALPHABETICAL INDEX (2/7) charging socket ........1.2 → 1.6, 1.8 → 1.19 driver vigilance warning ..........2.69 – 2.70 child restraint/seat ............1.58 → 1.75 driver’s position ..........0.4, 1.88 → 1.95 child safety ..0.3, 1.29, 1.32, 1.54, 1.58 → 1.75, 3.23 – 3.24 driving ....0.5, 1.108, 2.2 → 2.8, 2.10 → 2.15, 2.20 → 2.68, child seats ..............1.62 → 1.75 2.74 → 2.104, 2.120 → 2.125, 2.135 → 2.151, 2.155 → 2.157, children ........0.3, 1.30 → 1.32, 1.62 → 1.64 children (safety) ............3.23 – 3.24 driving aids ..0.5, 2.32 → 2.68, 2.71 → 2.73, 2.83 → 2.119, cleaning: 2.126 → 2.132, 2.135 → 2.157, 3.2 inside the vehicle ..........4.14 –...
Page 407 ALPHABETICAL INDEX (3/7) saving ................2.20 hands-free telephone integrated control ....3.21 – 3.22 energy consumption ......1.96 → 1.99, 2.20 – 2.21 «hands-free» card: battery ....... 5.14 – 5.15, 5.15 energy recovery ..............2.20 «hands-free» card: use ....1.24 → 1.28, 5.14 – 5.15, 5.15 energy saving ............2.17 → 2.21 hazard warning lights signal........1.111 – 1.112 engine headlight beam adjustment ........1.119 –...
Page 408 ALPHABETICAL INDEX (4/7) locking/unlocking the opening elements lane centring ............2.111 → 2.119 doors................1.29 lane departure prevention ........2.37 → 2.42 locking/unlocking the opening elements ....1.21 → 1.23, lane departure warning ..........2.32 → 2.42 1.30 → 1.35 levels ..................0.8 levels: maintenance: brake fluid ................4.6 bodywork ............4.11 → 4.13 coolant ................4.4 interior trim ............4.14 – 4.15 windscreen washer reservoir ..........4.6 mechanical ...........4.2 – 4.3, 6.8 → 6.13 lighting...
Page 409 ALPHABETICAL INDEX (5/7) light reminder alarm ............1.32 range of the traction battery ........2.17 → 2.19 opening the doors ............1.30 → 1.36 rear bench seat ..............3.33 opening/closing rear seats doors..............1.24 → 1.28 functions ................3.33 opening/closing rear seats ................1.47 doors and tailgate ..........1.30 → 1.35 rear view camera........... 2.133 – 2.134 opening/closing rear view mirrors ..........0.2, 1.81 → 1.83 luggage compartment ........1.24 → 1.28...
Page 410 ALPHABETICAL INDEX (6/7) see-me-home lighting .........1.115, 1.119 – 1.120 towing a caravan ............3.38, 6.6 service sheets ............6.8 → 6.13 towing hitch ............5.5, 5.22 → 5.24 settings towing rings .......1.65 → 1.67, 1.73 → 1.75, 3.37 configuration menu .......... 1.108 – 1.109 towing weights .................6.6 settings ..............1.108 – 1.109 traction battery .............1.2 → 1.6 side protection devices ............1.56 traction battery charge ..........1.8 → 1.19 signals and lights ..........
Page 411 ALPHABETICAL INDEX (7/7) weights ..................6.6 welcome aboard your vehicle ..........0.1 wheels (safety) .............5.6 → 5.9 windows ..................0.2 windscreen washer ........1.121 → 1.127, 4.6 windscreen washer/wiper ......1.108, 1.121 → 1.125 wiper blades ..........0.9, 5.20 – 5.21, 5.21 wipers blades ............5.20 – 5.21, 5.21 wipers ..............1.121 → 1.127...
Page 414 à999109927Sê ñ ò ä G8 RENAULT S.A.S. SOCIÉTÉ PAR ACTIONS SIMPLIFIÉE AU CAPITAL DE 533 941 113 € / 13-15, QUAI LE GALLO 92100 BOULOGNE-BILLANCOURT R.C.S. NANTERRE 780 129 987 — SIRET 780 129 987 03591 / renaultgroup.com NU 1402-2 – 99 91 099 27S – 02/2022 – Edition anglaise...

Renault MEGANE E-TECH 100% ELECTRIC 2022 User Manual

Section 1: Getting to Know Your Vehicle

Section 2: Driving

Section 3: Your Comfort

Section 4: Maintenance

Section 5: Practical Advice

Quick Links

Chapters

Related Manuals for Renault MEGANE E-TECH 100% ELECTRIC 2022

Summary of Contents for Renault MEGANE E-TECH 100% ELECTRIC 2022

Table of Contents