Access Control - Draytek Vigor2132 Series User Manual

After finishing all the settings here, please click OK to save the configuration.
4 . 1 5 . 4 A c c e s s C o
4 . 1 5 . 4 A c c e s s C o
In the Access Control, the router may restrict wireless access to certain wireless clients only
by locking their MAC address into a black or white list. The user may block wireless clients
by inserting their MAC addresses into a black list, or only let them be able to connect by
inserting their MAC addresses into a white list.
In the Access Control web page, users may configure the white/black list modes used by
each SSID and the MAC addresses applied to their lists.
Available settings are explained as follows:
Item
Enable Mac Address
Filter
MAC Address Filter
Client's MAC Address
Apply SSID
Attribute
you wish to use.
n t r o l
n t r o l
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be
grouped under different wireless LAN. For example, they
can be grouped under SSID 1 and SSID 2 at the same time
if you check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
After entering the client's MAC address, check the box of
the SSIDs desired to insert this MAC address into their
access control list.
s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC
355
Vigor2132 Series User's Guide