Draytek Vigor2132 Series User Manual page 326

RIP Direction - The option specifies the direction of RIP
(Routing Information Protocol) packets. You can
enable/disable one of direction here. Herein, we provide
four options: TX/RX Both, TX Only, RX Only, and
Disable.
From first subnet to remote network, you have to
do -
If the remote network only allows you to dial in with
single IP, please choose NAT, otherwise choose Route.
Change default route to this VPN tunnel - Check this box
to change the default route with this VPN tunnel.
2. After finishing all the settings here, please click OK to save the configuration.
Vigor2132 Series User's Guide
318