Draytek Vigor2132 Series User Manual page 337

Available settings are explained as follows:
Item
Enable
Phone Number
Display Name
SIP URL
Dial Out Account
Secure Phone
After finishing all the settings here, please click OK to save the configuration.
Note: If the incoming or outgoing calls do not match any entry on the phonebook, the
router will try to make the call "being protected". But, if the call ends up "unprotected"(e.g.
peer side does not support ZRTP+SRTP), the router will not play out a warning message.
Description
Click this to enable this entry.
The speed-dial number of this index. This can be any
number you choose, using digits 0-9 and * .
The Caller-ID that you want to be displayed on your
friend's screen. This let your friend can easily know who's
calling without memorizing lots of SIP URL Address.
Enter your friend's SIP Address.
Choose one of the SIP accounts for this profile to dial out. It
is useful for both sides (caller and callee) that registered to
different SIP Registrar servers. If caller and callee do not
use the same SIP server, sometimes, the VoIP phone call
connection may not succeed. By using the specified dial out
account, the successful connection can be assured.
ZRTP+SRTP - It allows users to have encrypted RTP
stream with the peer side using the same protocol
(ZRTP+SRTP). Check this box to have secure call.
329
Vigor2132 Series User's Guide