Draytek Vigor2132 Series User Manual page 144

Item
Index
Display Name
Physical Mode
Access Mode
Details Page
IPv6
Advanced
Vigor2132 Series User's Guide
Description
Display the WAN interface.
It shows the name of WAN1 that entered in general setup.
It shows the physical connection for WAN1 according to
the real network connection.
Use the drop down list to choose a proper access mode.
Then, click Details Page for accessing the settings page to
configure the settings.
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN
interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number
and data information when such function is enabled and
configured.
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Interface – Specify the WAN interface(s) that will be
overwritten by such function. WAN5 ~ WAN7 can be
located under WAN>>Multi-VLAN.
Option Number – Type a number for such function.
:
Note If you choose to configure option 61 here, the
136