Table of Contents
Advertisement
3.
In the following page, check Enable; set Dest IP Start and Dest IP End with 203.65.1.35
and 203.65.1.35; choose WAN1 as the Interface; click default gateway; do not check
Auto Failover To The Other WAN.
4.
After finished the above settings, click OK to save the configuration.
Now, the packets sent to the remote PC (IP address: 203.65.1.35) will be forcefully to
pass through WAN1.
117
Vigor2132 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2132 Series and is the answer not in the manual?
Questions and answers