Draytek Vigor2132 Series User Manual page 168

Advanced
Force router to use DNS
server IP address .....
Inter-LAN Routing
When you finish the configuration, please click OK to save and exit this page.
Vigor2132 Series User's Guide
DHCP packets can be processed by adding option number
and data information when such function is enabled.
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Interface: Specify the LAN interface(s) that will be
overwritten by such function.
Option Number – Type a number for such function.
:
Note If you choose to configure option 61 here, the
detailed settings in WAN>>Interface Access will be
overwritten.
DataType – Choose the type (ASCII, Hex or Address) for
the data to be stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4/LAN5 instead of DNS servers
given by the Internet Access server (PPPoE, PPTP, L2TP or
DHCP server).
Check the box to link two or more different subnets (LAN
and LAN).
160