Table of Contents
Advertisement
6.
A dialog box will be popped up. Choose Range Address as Address Type by using the
drop down list. Type 192.168.1.10 in the field of Start IP, and type 192.168.1.20 in the
field of End IP. Then, click OK to save the settings. The computers within the range can
access into the Internet.
7.
Now, check the content of Source IP is correct or not. The action for Filter shall be set
with Pass Immediately. Then, click OK to save the settings.
Vigor2132 Series User's Guide
104
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2132 Series and is the answer not in the manual?
Questions and answers