Draytek Vigor2132 Series User Manual page 14

Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB1~USB2
WAN
LAN1~LAN4
Phone1~ Phone2
PWR
ON/OFF
Vigor2132 Series User's Guide
Description
Press the button and release it within 2 seconds. When the wireless
function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn off the WLAN
function. When the wireless function is not ready, the LED will be off.
When WPS function is enabled by web user interface, press this button
for more than 2 seconds to wait for client's device making network
connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecter for a USB device.
Connecter for local network devices or modem for accessing Internet.
Connecters for local network devices.
Connecter for analog phone(s).
Connecter for a power adapter.
Power Switch.
6