Cleaning And Sterilization; Inspection And Maintenance; Environment; Transport And Storage Conditions - ADInstruments POWERLAB TEACHING SERIES Owner's Manual

Cleaning and Sterilization

ADInstruments products may be wiped down with a lint free cloth moistened with
industrial methylated spirit. Refer to the manufacturer's guidelines or the Data
Card supplied with transducers and accessories for specific cleaning and sterilizing
instructions.

Inspection and Maintenance

PowerLab systems and ADInstruments front-ends are all maintenance-free and do
not require periodic calibration or adjustment to ensure safe operation. Internal
diagnostic soft ware performs system checks during power up and will report errors if a
significant problem is found. There is no need to open the instrument for inspection or
maintenance, and doing so within the warranty period will void the warranty.
Your PowerLab system can be periodically checked for basic safety by using an
appropriate safety testing device. Tests such as earth leakage, earth bond, insulation
resistance, subject leakage and auxiliary currents and power cable integrity can all be
performed on the PowerLab system without having to remove the covers. Follow the
instructions for the testing device if performing such tests. If the PowerLab system
is found not to comply with such testing you should contact your ADInstruments
representative to arrange for the equipment to be checked and serviced.

Environment

Electronic components are susceptible to corrosive substances and atmospheres, and
must be kept away from laboratory chemicals.

Transport and Storage Conditions

Operating Conditions

Disposal

WEEE Directive
symbol
6
• Temperature in the range 0–40 °C
• Non-condensing humidity in the range 0–95%.
• Temperature in the range 5–35 °C
• Non-condensing humidity in the range 0–90%.
• Forward to recycling center or return to manufacturer.
• Unwanted equipment bearing the Waste Electrical and Electronic Equipment
(WEEE) Directive symbol requires separate waste collection. For a product
labeled with this symbol, either forward to a recycling center or contact your
nearest ADInstruments representative for methods of disposal at the end of its
working life.
PowerLab Teaching Series - Owner's Guide