Panasonic KX-NCP500 Features Manual page 429

a.
Tenant 1 (COS 1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant 3
(COS 5 and COS 6) as well as Tenant 1.
b.
Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c.
Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
•
An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (® 1.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
–
Music on Hold while a call is waiting in the queue
–
The Time Table which determines the overflow destination
PC Programming Manual References
4.4 [2-2] Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
4.6 [2-4] Week Table
4.8 [2-5] Holiday Table
4.14 [2-7-3] Class of Service—Internal Call Block
5.7 [3-2] User Group
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
7.1 [5-1] Doorphone—
7.7 [5-5] External Sensor—
8.1 [6-1] System Speed Dial
8.6 [6-6] Tenant
Section 10 [8] ARS
10.6 [8-5] Carrier—Authorisation Code for Tenant
12.2 [10-2] DIL Table & Port Settings—DIL—
12.3 [10-3] DDI / DID Table—
12.6 [10-4] MSN Table—MSN—
PT Programming Manual References
[001] System Speed Dialling Number
[006] Operator Assignment
[320] ARS Mode
[711] Music on Hold
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
3.1 Capacity of System Resources
Tenant Number
Tenant No.
Tenant Number
Tenant Number
User Group
User Group
Tenant Number
2.2.3 Tenant Service
Tenant Number
Feature Guide 429