Panasonic KX-NCP500 Features Manual page 316

1.26.1 Record Log Features
® 13.1 [11-1] Main—RS-232C—
® [800] RS-232C Parameter—Word Length
d.
Parity Bit: A parity code indicates what type of parity is used to detect an error in the string of bits
composing a character. Make an appropriate selection depending on the requirements of the PC or
printer.
® 13.1 [11-1] Main—RS-232C—
® [800] RS-232C Parameter—Parity Bit
e.
Stop Bit Length: A stop bit code indicates the end of a bit string which composes a character. Select
an appropriate value depending on the requirements of the PC or printer.
® 13.1 [11-1] Main—RS-232C—
® [800] RS-232C Parameter—Stop Bit Length
•
If a call is transferred to an ICD group using Automatic Transfer, the condition code "TR" will not be recorded
on SMDR (® 1.12.1 Call Transfer).
[Host PBX Access Code]
•
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require a
"0" to be dialled first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this case this PBX recognises the telephone company as the host PBX. Therefore, only
long distance calls are recorded on SMDR.
[Output to a Telnet compatible Terminal Emulator]
•
In order to activate a connection to a terminal emulator, the IP address of the MPR card, port number, user
ID ("SMDR"), and password must be entered.
•
If a terminal emulator user incorrectly enters the user ID or password 3 times consecutively, an alarm will
be sent and connection will not be possible for 10 minutes.
•
Through system programming, it is possible to assign the PBX port number and password.
•
The terminal emulator application must be running constantly. If the application is terminated, call records
that occur after the termination will be recorded in the PBX's memory. However, if the number of call records
exceeds the PBX's capacity, older records will be deleted. Also, when the application restarts or is
reconnected, duplicated call records may be output.
[Using SMDR with applications]
SMDR data can also be monitored by applications such as Panasonic CA Call Accounting. For more
information, see your application's documentation.
Installation Manual References
KX-NCP500/KX-NCP1000
3.10.1 Connection of Peripherals
KX-TDE100/KX-TDE200
3.3.3 IPCMEC Card (KX-TDE0105)
3.10.1 Connection of Peripherals
KX-TDE600
3.3.3 IPCMEC Card (KX-TDE0105)
3.12.1 Connection of Peripherals
316 Feature Guide
Communication—Word Length
Communication—Parity Bit
Communication—Stop Bit