Panasonic KX-NCP500 Features Manual page 152

1.10.1 Automatic Route Selection (ARS)
Removed Number of Digits
user-dialled number.
® 10.6 [8-5] Carrier—Carrier—
® [352] ARS Removed Number of Digits for Carrier Access
Carrier Access Code
® 10.6 [8-5] Carrier—Carrier—
® [353] ARS Carrier Access Code
Trunk Group
11
selected.
When using PC programming, trunk groups can be assigned to a carrier using an on/off setting for each
trunk group. They can also be given a priority setting (1–4) which decides the order they are searched
when seizing a line. If there are no available lines in the trunk groups set to priority 1–4, the other trunk
groups set to on are searched in the order of smallest number first.
[Example]
Carrier
ABC
XYZ
® 10.6 [8-5] Carrier—TRG(Priority)
® 10.6 [8-5] Carrier—TRG 01–TRG 64 (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/TRG
01–TRG 96 (for KX-TDE600)
® [351] ARS Trunk Group for Carrier Access
Modify Command
® 10.6 [8-5] Carrier—Carrier—
[Command Explanation]
Command
Number
152 Feature Guide
: Assign the number of digits to remove from the beginning of the
9
Removed Number of Digits
: Assign the code to access the carrier.
10
Carrier Access Code
: Assign the trunk groups which connect to each carrier and the priority in which they are
Priority Setting
1 2 3
9 3 1
12 4 None
: Assign the commands to modify the dialled number to access the carrier.
12
Modify Command
Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
A Add the Authorisation code for a tenant (
G Add the Authorisation code for a trunk group (
I Add the Itemised Billing code (
H Add the dialled number after the digits are removed (Home position).
Trunk Groups Set
to On
4
7 5, 7, 9, 11
None 6, 10
Description
15
Searching Order
9 ® 3 ® 1 ® 7 ® 5 ® 11
12 ® 4 ® 6 ® 10
).
13
).
14
).