Floating Extension - Panasonic KX-NCP500 Features Manual

2.3.7 Floating Extension

Description
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station.
These numbers are defined as floating extension numbers and can be assigned as a destination of incoming
calls etc.
Resource
Device External Pager
Outgoing Message
(OGM)
Built-in Simplified
Voice Message
(SVM)
Analogue Remote
Maintenance
ISDN Remote
Maintenance
Group Incoming Call
Distribution Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
Conditions
•
It is possible to give names to floating extension numbers.
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Extension
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Group Name
5.20 [3-7-2] VM(DPT) Group—Unit Settings—
5.23 [3-8-2] VM(DTMF) Group—Group Settings—
5.25 [3-9] PS Ring Group—
7.2 [5-2] External Pager—
7.4 [5-3-2] Voice Message—DISA Message—
13.1 [11-1] Main—Remote
Used as the destination for TAFAS feature.
(® 1.17.3 Trunk Answer From Any Station
(TAFAS))
Used to send messages for DISA feature.
(® 1.17.6 Direct Inward System Access
(DISA))
Used to access message boxes associated
with extensions. (® 1.17.7 Built-in Simplified
Voice Message (SVM))
Used to access the PC programming mode
through a modem on a PC.
Used to access the PC programming mode
through the ISDN interface on a PC.
Used to call an incoming call distribution
group. (® 1.2.2.1 Incoming Call Distribution
Group Features—SUMMARY)
Used to call a PS ring group. (® 1.25.2 PS
Ring Group)
Used to call a VM (DPT) group.
Used to call a VM (DTMF) group.
Floating Extension No.
Floating Extension Number
"Page Number 1, Page Number 2—Floating Extension Number
Floating Extension Number
Description
Floating Ext. No.
2.3.7 Floating Extension
Default
600
5 + two-digit
OGM number
591
599
699
6 + two-digit
group
number
—
500 (VM
[DPT] Group
1)
—
Feature Guide 455