Panasonic KX-NCP500 Features Manual page 260

1.21.1 Integrated Services Digital Network (ISDN)
Conditions
•
The availability of this feature is dependent on the contract with the telephone company.
•
CLIP/COLP features comply with the following European Telecommunication Standard (ETS)
specifications:
–
ETS 300 092 Calling Line Identification Presentation (CLIP) supplementary service.
–
ETS 300 097 Connected Line Identification Presentation (COLP) supplementary service.
•
CLIR/COLR features comply with the following European Telecommunication Standard (ETS)
specifications:
–
ETS 300 093 Calling Line Identification Restriction (CLIR) supplementary service.
–
ETS 300 098 Connected Line Identification Restriction (COLR) supplementary service.
•
The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
•
COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
•
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customised as the CLIR or COLR button.
•
The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
•
When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (® 1.30.4.2 Calling/Connected Line Identification Presentation
(CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
•
When forwarding calls to a public trunk, system programming selects whether the CLIP number of the
calling party or of the forwarding extension is sent to the forward destination.
However, if the call is transferred to another PBX via a private network from a VPS, the CLIP number of
the calling party is always sent, regardless of system programming.
•
When a call is placed on the network (including a private network), "0" or "00" may be deleted from the
CLIP information sent to the network, depending on system programming.
PC Programming Manual References
3.33 [1-1] Slot—Port Property - BRI Port
→ISDN CO—
→Supplementary Service—
CCBS, AOC-D, AOC-E, 3PTY
3.35 [1-1] Slot—Port Property - PRI Port
→CO Setting—
→Supplementary Service—
CCBS, AOC-D, AOC-E, E911, 3PTY
3.38 [1-1] Slot—Port Property - T1 Port—
3.44 [1-1] Slot—Port Property - E1 Port—
4.9 [2-6-1] Numbering Plan—Main—Features
→ COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension
4.18 [2-9] System Options—Option 4
→ Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
→ Send CLIP of CO Caller—when call is forwarded to CO
→ Send CLIP of Extension Caller—when call is forwarded to CO
4.18 [2-9] System Options—Option 7
→ CLIP Modification (Outgoing)—"0" Delete from CLIP
→ CLIP Modification (Outgoing)—"00" Delete from CLIP
260 Feature Guide
Subscriber Number
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
Subscriber Number
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
Subscriber Number
Subscriber Number