Panasonic KX-NCP500 Features Manual page 284

1.24.2 Voice Mail DTMF Integration
Parameter
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
Trunk Call
Operator
c.
Voice Mail (VM) Transfer Button
By pressing the Voice Mail (VM) Transfer button during a call, an extension user can transfer a call to
a mailbox of the VPS so that the caller can leave a message in the mailbox of the desired extension.
When the extension user presses this button and enters the desired extension number, the PBX will
transfer the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without knowing
the mailbox number.
6.5 [4-1-4] Wired Extension—Flexible Button
®
Type
®
Extension Number (for Voice Mail Transfer)
6.13 [4-2-3] Portable Station—Flexible Button
®
Type
®
Extension Number (for Voice Mail Transfer)
6.17 [4-3] DSS Console
®
Type
®
Extension Number (for Voice Mail Transfer)
284 Feature Guide
In AA Service Mode
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
PBX
FWD, Intercept
Transfer
Extn. 102
Transmitted Command
Sent "#6" + "102".
mailbox number
Switching to VM command
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Switching to AA command (#8)
VM Port 2
VM Port 3